D38999/49 Defense Supply Center, D38999/49 Datasheet - Page 4

• Manufacturer Part Number: D38999/49
• Description: D38999K / D38999J 500 Cycle Contact
• Manufacturer: Defense Supply Center

Note: When other than standard power contacts are used, the requirements stated herein may
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks
FEDERAL
DEPARTMENT OF DEFENSE
not be met.
QQ-N-290
QQ-P-416
MIL-C-17
MIL-S-901
MIL-DTL-5624
MIL-S-7742
MIL-A-8625
MIL-DTL-22520 -
MIL-W-22759
MIL-C-39029
MIL-A-46146
MIL-DTL-81381 -
(2) Contact designators for connectors using other than standard contact arrangements as
The A and B designators are used to indicate that the connectors will be used with other than
standard contacts as indicated in MIL-STD-1560 (example: shielded, coaxial thermocouple,
fiber optic contacts). The A and B designators are part of the connector PINs and should be
marked on the connectors.
The standard contacts should not be supplied with the connectors. The contacts that will be
used with the connectors must be ordered separately (see 3.4.1.1, 3.43, and 6.2).
indicated in MIL-STD-1560 are as follows:
A -Pin contact insert.
B -Socket contact insert.
-
-
-
-
-
-
-
-
-
-
Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy.
Nickel Plating (Electrodeposited).
Plating, Cadmium (Electrodeposited).
Cables, Radio Frequency, Flexible and Semirigid,
General Specification For.
Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment
Turbine Fuel, Aviation, Grades JP-4 and JP-5.
Screw Threads, Standard, Optimum Selected Series,
General Specification For.
Anodic Coatings, for Aluminum and Aluminum Alloys.
Crimping Tools, Wire Termination, General Specification For.
Contacts, Electrical Connector, General Specification For.
Adhesive Sealants, Silicone, RTV, Non-corrosive
(for use with Sensitive Metals and Equipment).
Wire, Electrical, Polyimide-Insulated, Copper or Copper Alloy.
and Systems, Requirements.
MIL-DTL-38999K
4