LM96080CIMT-NOPB1 NSC [National Semiconductor], LM96080CIMT-NOPB1 Datasheet - Page 4

• Manufacturer Part Number: LM96080CIMT-NOPB1
• Description: System Hardware Monitor with 2-Wire Serial Interface
• Manufacturer: NSC [National Semiconductor]

www.national.com
Number
15-21
23-24
Pin
10
11
12
13
14
22
NTEST_OUT
GPO (Power
NTEST_IN/
RESET_IN
RST_OUT/
Name(s)
Bypass)
IN6-IN0
Switch
GNDA
A1-A2
Pin
INT
A0/
OS
Structure
ESD
Digital Output
Digital Output
Digital Output
Analog Inputs
Digital Inputs
Digital Input
GROUND
Digital I/O
Type
4
Non-Maskable Interrupt (Active High, PMOS, open-drain)
or Interrupt Request (Active Low, NMOS, open-drain).
Whenever INT_IN, BTI, or GPI interrupts, this output pin
becomes active.
General Purpose Output pin is an active low NMOS open
drain output intended to drive an external power PMOS
for software power control or can be utilized to control
power to a cooling fan.
An active-low input that enables NAND Tree board-level
connectivity testing. Whenever NAND Tree connectivity
is enabled, the LM96080 resets to its power on state.
This pin is an NMOS open drain output. RST_OUT
provides a master reset to devices connected to this line.
OS is dedicated to the temperature reading
WATCHDOG.
Internally connected to all analog circuitry. The ground
reference for all analog inputs. This pin needs to be taken
to a low noise analog ground plane for optimum
performance.
0V to 2.56V full scale range Analog Inputs.
The lowest order bit of the Serial Bus Address. This pin
also functions as an output when doing a NAND Tree test.
The two highest order bits of the Serial Bus Address.
Description