BUS-12-087 FCI-CONNECTOR [FCI connector], BUS-12-087 Datasheet - Page 10

• Manufacturer Part Number: BUS-12-087
• Manufacturer: FCI-CONNECTOR [FCI connector]

NUMBER
TITLE
Ribcage™ II Printed Wiring Board Connector System
Copyright FCI
Form E-3334
Rev F
3.7
BUS-12-087
Environmental Conditions
3.7.1 Humidity - Within 1 hour after exposure of the connectors
3.7.2 Thermal Shock - After exposure of the connectors to
3.7.3 High Temperature Life - After exposure of the mated
to a high humidity environment, the insulation resistance of an unterminated connector
shall be not less than 5000 megaohms (see paragraph 3.5.3) and the contact
resistance of a terminated and mated connector shall not exceed the value specified in
Table I (see paragraph 3.5.2). The test shall be in accordance with MIL-STD-202,
Method 103; the following details shall apply:
(a)
(b)
(c)
alternate periods of extreme high and low temperature, there shall be no evidence of
cracking or crazing of the insulator housing or other physical damage to the connector;
the insulation resistance shall meet paragraph 3.5.3; the dielectric withstanding voltage
of an unterminated connector shall be not less than 800 volts (see paragraph 3.5.4)
and the contact retention shall be not less than 0.3 pounds (see paragraph 3.6.1). The
test shall be in accordance with MIL-STD-202, Method 107; the following details shall
apply:
(a)
(b)
connector to a high temperature operating environment, the contact resistance shall
not exceed the value specified in Table I (see paragraph 3.5.2) and the insulation
resistance of the connectors shall meet Section 3.5.3. The test shall be in accordance
with MIL-STD-202, Method 108; the following details shall apply:
(a)
(b)
(c)
TYPE
Test duration: 96 hours
Relative humidity: 90% minimum
Temperature: 40 o C
Test conditions: A-1 (25 1-hour cycles)
Temperature range: -55 to +130 o C
Test chamber temperature: 100 o C
Test condition (duration): B (250 hours)
Operating conditions: Rated current (see paragraph 3.5.1) through all contacts
of terminated connector; duty cycle: 45 minutes ON and 15 minutes OFF.
PRODUCT SPECIFICATION
PDM: Rev:M
STATUS:
PAGE
AUTHORIZED BY
CLASSIFICATION
C. Martinez
Released
10 of 21
UNRESTRICTED
Printed: Nov 28, 2010
REVISION
DATE
27 Feb 07
M
GS-01-001
.