SDA9489X ETC [List of Unclassifed Manufacturers], SDA9489X Datasheet - Page 35

• Manufacturer Part Number: SDA9489X
• Description: PIP IV Advanced SOPHISTICUS High-End Picture-In-Picture ICs
• Manufacturer: ETC [List of Unclassifed Manufacturers]

SDA 9489X
SDA 9589X
4.9
4.9.1
The on screen display allows to insert a block of 5 characters into each of the PIP
pictures. The characters are placed in a box (background) whose width is 64 pixels and
height is 12 lines. This box is placed in the upper left corner of the PIP picture. 64
different characters are stored in a character ROM. Each character is defined by a pixel
matrix consisting of 10 lines and 12 pixels per line. A doubling of the character’s height
and width is achieved by CHRDHW. The OSD starting position is not influenced.
OSD display is also possible if PIP is switched off (DISPMOD =’100011’). Now 3 lines of
20 characters each are displayed at the PiP position.
Figure 4-17 Example of OSD-only mode
Figure 4-18 Example of transparent mode (normal and double size OSD)
4.9.2
The characters are programmed via I²C bus using a 7 bit code which is identical with the
ASCII code except for some of the special characters. The codes are stored in a
character RAM consisting of 60 cells. The character codes can be transmitted in two
ways: each character position can be addressed separately by its 7 bit address or the
characters can be written consecutively starting at an arbitrarily chosen position. In this
case the address is increased automatically. The 7 bit address consists of two parts: the
4 MSBs are used to chose one of the partial pictures and the 3 LSBs to select one of the
5 characters per block.
Micronas
On Screen Display (OSD)
Display Format
Character Programming
Preliminary Data Sheet
System Description
4-35