SDA9489X ETC [List of Unclassifed Manufacturers], SDA9489X Datasheet - Page 14

no-image

SDA9489X

Manufacturer Part Number
SDA9489X
Description
PIP IV Advanced SOPHISTICUS High-End Picture-In-Picture ICs
Manufacturer
ETC [List of Unclassifed Manufacturers]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SDA9489X
Manufacturer:
MICRONR
Quantity:
5 510
Part Number:
SDA9489X
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Part Number:
SDA9489X B31
Manufacturer:
SUN
Quantity:
38
Part Number:
SDA9489X B31
Manufacturer:
MICRONAS
Quantity:
1 000
Part Number:
SDA9489X B31
Manufacturer:
MICRONAS
Quantity:
20 000
Part Number:
SDA9489X GEG
Manufacturer:
MICRONAS
Quantity:
592
Part Number:
SDA9489X-B31
Manufacturer:
MICRONAS
Quantity:
381
Part Number:
SDA9489X-B31
Manufacturer:
MICRONAS
Quantity:
20 000
Part Number:
SDA9489XB31
Manufacturer:
Micronas
Quantity:
209
SDA 9489X
SDA 9589X
by a digital PLL. At SECAM operation the PLL runs free and generates the line-wise
alternating subcarriers. A CORDIC structure demodulates the frequency-modulated UV
signals. The following SECAM de-emphasis filter characteristic is adjustable (DEEMP).
The chroma signal can be filtered before demodulation by means of a selectable IF-
prefilter (IFCOMP).
Figure 4-5
The Hue Control (HUE) influences the phase of the demodulation subcarrier between
-44.8° and 43.4° in steps of 1.4°. This is provided for NTSC only and adjustment is
ineffective for PAL and SECAM signals.
The reference for the subcarrier generation is a crystal stable clock of 20.25000 MHz. In
order to avoid color standard detection problems, the maximum deviation of this
frequency should not exceed 100ppm. For a good PLL locking behavior a maximum
deviation of 40ppm is recommended. A small frequency adjustment (-150 ... +310 ppm)
is possible for using a crystal with small frequency deviations (SCADJ). For test
purposes, CPLL allows to open the loop of the chroma PLL.
For deviations in the chroma signal up to 30dB, a stable output amplitude after chroma
decoding is achieved due to the ACC (Automatic Chroma Control). If the chroma signal
(color burst) is below a selectable threshold (CKILL), the color will be switched off.
Alternatively the color-killer can be bypassed and the color can be switched on or off
under all conditions (COLON). By setting ACCFIX, the automatic chroma control is
disabled and set to a default value.
Micronas
10
15
20
5
0
0
0.5
characteristic
SECAM de-emphasis filter characteristic and IF-compensation filter
frequency [MHz]
1
1.5
2
DEEMP = ’00’
DEEMP = ’01’
DEEMP = ’10’
DEEMP = ’11’
2.5
2.5
7.5
2.5
10
5
5
0
2
IFCOMP = ’00’
IFCOMP = ’01’
IFCOMP = ’10’
3
Preliminary Data Sheet
3.58
frequency [MHz]
System Description
4
4.4
5
4-14
6

Related parts for SDA9489X