m393b1k70bh1 Samsung Semiconductor, Inc., m393b1k70bh1 Datasheet - Page 37

• Manufacturer Part Number: m393b1k70bh1
• Description: Ddr3 Sdram
• Manufacturer: Samsung Semiconductor, Inc.

DDR3-1333 Speed Bins
17.3.1 Speed Bin Table Notes
Absolute Specification (T
Note :
1. The CL setting and CWL setting result in tCK(AVG).MIN and tCK(AVG).MAX requirements. When making a selection of tCK(AVG), both need to be ful-
2. tCK(AVG).MIN limits: Since CAS Latency is not purely analog - data and strobe output are synchronized by the DLL - all possible intermediate frequen-
3. tCK(AVG).MAX limits: Calculate tCK(AVG) = tAA.MAX / CL SELECTED and round the resulting tCK(AVG) down to the next valid speed bin (i.e. 3.3ns
4. "Reserved" settings are not allowed. User must program a different value.
5. "Optional" settings allow certain devices in the industry to support this setting, however, it is not a mandatory feature. Refer to supplier’s data sheet and/
6. Any DDR3-1066 speed bin also supports functional operation at lower frequencies as shown in the table which are not subject to Production Tests but
7. Any DDR3-1333 speed bin also supports functional operation at lower frequencies as shown in the table which are not subject to Production Tests but
8. Any DDR3-1600 speed bin also supports functional operation at lower frequencies as shown in the table which are not subject to Production Tests but
9. For devices supporting optional downshift to CL=7 and CL=9, tAA/tRCD/tRP min must be 13.125 ns or lower. SPD settings must be programmed to
Intermal read command to first data
ACT to internal read or write delay time
PRE command period
ACT to ACT or REF command period
ACT to PRE command period
CL = 6
CL = 7
CL = 8
CL = 9
CL = 10
Supported CL Settings
Supported CWL Settings
Registered DIMM
filled: Requirements from CL setting as well as requirements from CWL setting.
cies may not be guaranteed. An application should use the next smaller JEDEC standard tCK(AVG) value (2.5, 1.875, 1.5, or 1.25 ns) when calculat-
ing CL [nCK] = tAA [ns] / tCK(AVG) [ns], rounding up to the next "SupportedCL".
or 2.5ns or 1.875 ns or 1.25 ns). This result is tCK(AVG).MAX corresponding to CL SELECTED.
or the DIMM SPD information if and how this setting is supported.
verified by Design/Characterization.
verified by Design/Characterization.
verified by Design/Characterization.
match. For example, DDR3-1333(CL9) devices supporting downshift to DDR3-1066(CL7) should program 13.125 ns in SPD bytes for tAAmin (Byte
16), tRCDmin (Byte 18), and tRPmin (Byte 20). DDR3-1600(CL11) devices supporting downshift to DDR3-1333(CL9) or DDR3-1066(CL7) should pro-
gram 13.125 ns in SPD bytes for tAAmin (Byte16), tRCDmin (Byte 18), and tRPmin (Byte 20). Once tRP (Byte 20) is programmed to 13.125ns, tRC-
min (Byte 21,23) also should be programmed accodingly. For example, 49.125ns (tRASmin + tRPmin=36ns+13.125ns) for DDR3-1333(CL9) and
48.125ns (tRASmin+tRPmin=35ns+13.125ns) for DDR3-1600(CL11).
Parameter
OPER
CL-nRCD-nRP
; V
Speed
DDQ
= V
CWL = 5,6
CWL = 5,6
CWL = 5
CWL = 6
CWL = 7
CWL = 5
CWL = 6
CWL = 7
CWL = 5
CWL = 6
CWL = 7
CWL = 7
CWL = 7
DD
= 1.5V +/- 0.075 V);
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
tCK(AVG)
Symbol
tRCD
tRAS
tRP
tRC
tAA
37 of 51
13.5 (13.125)
13.5 (13.125)
13.5 (13.125)
49.5 (49.125)
1.875
1.875
min
2.5
1.5
1.5
36
(Optional) Note 5,9
5,9
5,9
5,9
5,9
DDR3-1333
(Optional)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
9 -9 - 9
6,7,8,9
5,6,7
9*tREFI
<1.875
<1.875
max
<2.5
<2.5
3.3
20
-
-
-
Rev. 1.0 December 2008
DDR3 SDRAM
Units
nCK
nCK
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
1,2,3,4,7
1,2,3,4,7
1,2,3,4,
1,2,3,4,
1,2,3,7
1,2,3,7
1,2,3,4
Note
1,2,3
8
4
4
4
4
4
5