ak4561 AKM Semiconductor, Inc., ak4561 Datasheet - Page 46

no-image

ak4561

Manufacturer Part Number
ak4561
Description
16bit Codec With Built-in Alc And Mic/hp-amp
Manufacturer
AKM Semiconductor, Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ak4561VQ
Manufacturer:
AKM
Quantity:
20 000
ASAHI KASEI
n FADEOUT Mode
In FADEOUT mode, the present IPGA value is decreased until the MUTE state when FDOUT bit changes from “0” to
“1”. This operation is always detected by the zero crossing operation.
If the large signal is input to the ALC circuit during the FADEOUT operation, the ALC limiter operation is done.
However a total time of the FADEOUT operation is the same time, even if the limiter operation is done. The period of
FADEOUT is set by FDTM1-0 bits, a number of step can be set by FDATT bit.
When FDOUT bit changes into “0” during the FADEOUT operation, the ALC operation start from the preset IPGA value.
When FDOUT and ALC bits change into “0” at the same time, the FDOUT operation stops and the IPGA becomes the
value at that time.
NOTE: When FDIN and FDOUT bits are “1”, FDOUT bit is enabled.
(1) WR (FDOUT = “1”): The FADEOUT operation starts. Then ALC bit should be always “1”.
(2) FADEOUT time can be set by FDTM1-0 and FDATT bits.
(3) The FADEOUT operation is completed. The IPGA value is the MUTE state. If FDOUT bit is keeping “1”, the IPGA
(4) Analog and digital outputs mutes externally. Then the IPGA value is the MUTE state.
(5) WR (ALC = FDOUT = “0”): Exit the ALC and FADEOUT operations
(6) WR (IPGA): The IPGA value changes the initial value (exiting MUTE state).
(7) WR (ALC = “1”, FDOUT = “0”): The ALC operation restarts. But the ALC bit should not write until completing zero
(8) Release a mute function of analog and digital outputs externally.
Rev. 0.9
During the FADEIN operation, the zero crossing timeout period is ignored and becomes the same as the FADEIN
period.
value is keeping the MUTE state.
crossing operation of IPGA.
E.g. FDTM1-0 = 32ms, FDATT = 1step
(96 x FDTM1-0) / FDATT = 96 x 32ms / 1 = 3.07s
IPGA Output
ALC bit
FDOUT bit
Figure 34. Example for controlling sequence in FADEOUT operation
(1)
AKM CONFIDENTIAL
(2)
- 46 -
(3)
(4)
(5)
(6)
(7)
(8)
[AK4561]
2000/09

Related parts for ak4561