sc16is762ipw NXP Semiconductors, sc16is762ipw Datasheet - Page 30

• Manufacturer Part Number: sc16is762ipw
• Description: Dual Uart With I2c-bus/spi Interface, 64 Bytes Of Transmit And Receive Fifos, Irda Sir Built-in Support
• Manufacturer: NXP Semiconductors

NXP Semiconductors
SC16IS752_SC16IS762_6
Product data sheet
8.13 Transmitter FIFO Level register (TXLVL)
8.14 Receiver FIFO Level register (RXLVL)
8.15 Programmable I/O pins Direction register (IODir)
8.16 Programmable I/O pins State register (IOState)
This register is a read-only register. It reports the number of spaces available in the
transmit FIFO.
Table 24.
This register is a read-only register, it reports the fill level of the receive FIFO, that is, the
number of characters in the RX FIFO.
Table 25.
This register is used to program the I/O pins direction. Bit 0 to bit 7 controls GPIO0 to
GPIO7.
Table 26.
When ‘read’, this register returns the actual state of all I/O pins. When ‘write’, each
register bit will be transferred to the corresponding I/O pin programmed as output.
Table 27.
Bit
7
6:0
Bit
7
6:0
Bit
7:0
Bit
7:0
Symbol
-
TXLVL[6:0]
Symbol
-
RXLVL[6:0]
Symbol
IODir
Symbol
IOState
Transmitter FIFO Level register bits description
Receiver FIFO Level register bits description
IODir register bits description
IOState register bits description
Rev. 06 — 19 December 2006
Dual UART with I
Description
not used; set to zeros
number of spaces available in TX FIFO, from 0 (0x00) to 64 (0x40)
Description
not used; set to zeros
number of characters stored in RX FIFO, from 0 (0x00) to 64 (0x40)
Description
Set GPIO pins [7:0] to input or output.
Description
Write this register: set the logic level on the output pins
Read this register: return states of all pins
0 = input
1 = output
0 = set output pin to zero
1 = set output pin to one
2
SC16IS752/SC16IS762
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
© NXP B.V. 2006. All rights reserved.
30 of 59