at45db081d-su-sl955 ATMEL Corporation, at45db081d-su-sl955 Datasheet - Page 51

• Manufacturer Part Number: at45db081d-su-sl955
• Description: 8-megabit 2.5-volt Or 2.7-volt Dataflash
• Manufacturer: ATMEL Corporation

28. Revision History
3596I–DFLASH–4/08
Revision Level – Release Date
A – November 2005
B – March 2006
C – July 2006
D – November 2006
E – February 2007
F – August 2007
G – January 2008
H – January 2008
I – April 2008
History
Initial Release
Added Preliminary.
Added text, in “Programming the Configuration Register”, to indicate
that power cycling is required to switch to “power of 2” page size
after the opcode enable has been executed.
Added “Legacy Commands” table.
Corrected PA3 in opcode 50h for addressing sequence with
standard page size. Corrected Chip Erase opcode from 7CH to
C7H. Clarified the commands B and C usage for operation mode.
Removed Preliminary.
Added errata regarding Chip Erase.
Changed various timing parameters under
Removed RDY/BUSY pin references.
Removed SER/BYTE statement from SI and SO pin descriptions in
Table 2-1.
Added additional text to “power of 2” binary page size option.
Changed t
Changed t
Added additional text, in “power of 2” binary page size option, to
indicate that the address format is changed for devices with page
size set to 256 bytes.
Corrected typographical error to indicate that Figure 13-1 indicates
Program Configuration Register.
Removed DataFlash card pinout.
Added part number ordering code details for suffixes SL954/955
Added ordering code details.
VSCL
RDPD
from 50 µs to 70 µs.
from 30 µs to 35 µs.
AT45DB081D
Table
18-4.
51