saa7129ah-v1 NXP Semiconductors, saa7129ah-v1 Datasheet - Page 46
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
saa7129ah-v1
Manufacturer Part Number
saa7129ah-v1
Description
Digital Video Encoder
Manufacturer
NXP Semiconductors
Datasheet
1.SAA7129AH-V1.pdf
(55 pages)
Philips Semiconductors
9.1
1. The HPLL increment is not evaluated by the
2. The SAA7128AH; SAA7129AH generates the
3. The PAL bit indicates the line with inverted (R
4. If the reset bit is enabled (RTCE = 1; DECPH = 1;
5. If the FISE bit is enabled (RTCE = 1; DECFIS = 1), the
2003 Dec 09
handbook, full pagewidth
Digital video encoder
RTCI
(1) SAA7111/12 provides 14 to 0 bits, resulting in 2 reserved bits before FSCPLL increment.
(2) SAA7151 provides 21 to 0 bits only, resulting in 5 reserved bits before sequence bit.
(3) Sequence bit: PAL: 0 = (R
(4) Reset bit: only from SAA7111 and SAA7112 decoder.
(5) FISE bit: 0 = 50 Hz, 1 = 60 Hz.
(6) Odd/even bit: odd_even from external.
(7) Colour detection: 0 = no colour detected, 1 = colour detected.
(8) Reserved bits: 229 with 50 Hz systems, 226 with 60 Hz systems.
SAA7128AH; SAA7129AH.
subcarrier frequency from the FSCPLL increment if
enabled (see item 7.).
component of colour difference signal.
PHRES = 00), the phase of the subcarrier is reset in
each line whenever the reset bit of RTCI input is set to
logic 1.
SAA7128AH; SAA7129AH takes this bit instead of the
FISE bit in subaddress 61H.
Explanation of RTCI data bits
HIGH-to-LOW transition
count start
128
time slot:
not used in SAA7128AH/29AH
LOW
Y) line normal, 1 = (R
0 1
13
increment
HPLL
(1)
14
0
reserved
Y) line inverted; NTSC: 0 = no change.
4 bits
Fig.22 RTCI timing.
19
22
Y)
46
6. If the odd/even bit is enabled (RTCE = 1; DECOE = 1),
7. If the colour detection bit is enabled (RTCE = 1;
the SAA7128AH; SAA7129AH ignores its internally
generated odd/even flag and takes the odd/even bit
from RTCI input.
DECCOL = 1) and no colour was detected (colour
detection bit = 0), the subcarrier frequency is
generated by the SAA7128AH; SAA7129AH. In the
other case (colour detection bit = 1) the subcarrier
frequency is evaluated out of FSCPLL increment.
If the colour detection bit is disabled (RTCE = 1;
DECCOL = 0), the subcarrier frequency is evaluated
out of FSCPLL increment, independent of the colour
detection bit of RTCI input.
sample
FSCPLL increment
valid
SAA7128AH; SAA7129AH
sample
invalid
(2)
8/LLC
reserved
3 bits
64
Product specification
0
67
68
MHB980
(3)
69
(4)
(5)
72 74
(6)
(8)
(7)