saf7118 NXP Semiconductors, saf7118 Datasheet - Page 33

no-image

saf7118

Manufacturer Part Number
saf7118
Description
Multistandard Video Decoder With Adaptive Comb Filter And Component Video Input
Manufacturer
NXP Semiconductors
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
saf7118E
Manufacturer:
NXP
Quantity:
5 510
Part Number:
saf7118E
Manufacturer:
OMRON
Quantity:
5 510
Part Number:
saf7118EH
Manufacturer:
PHILIPS
Quantity:
252
Part Number:
saf7118EH/V1
Manufacturer:
INFINEON
Quantity:
101
Part Number:
saf7118EH/V1/G,518
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Part Number:
saf7118EH/V1/G,557
Manufacturer:
FREESCALE
Quantity:
101
Part Number:
saf7118EH/V1/G,557
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Part Number:
saf7118H/V1,557
Manufacturer:
Sigma Designs Inc
Quantity:
10 000
Philips Semiconductors
SAF7118_3
Product data sheet
8.1.3 Synchronization
8.1.4 Clock generation circuit
The prefiltered luminance signal is fed to the synchronization stage. Its bandwidth is
further reduced to 1 MHz in a low-pass filter. The sync pulses are sliced and fed to the
phase detectors where they are compared with the sub-divided clock frequency. The
resulting output signal is applied to the loop filter to accumulate all phase deviations.
Internal signals (e.g. HCL and HSY) are generated in accordance with analog front-end
requirements. The loop filter signal drives an oscillator to generate the line frequency
control signal LFCO; see
The detection of ‘pseudo syncs’ as part of the Macrovision copy protection standard is
also achieved within the synchronization circuit.
The result is reported as flag COPRO within the decoder status byte at subaddress 1Fh.
The internal CGC generates all clock signals required for the video input processor.
The internal signal LFCO is a digital-to-analog converted signal provided by the horizontal
PLL. It is the multiple of the line frequency:
The LFCO signal is multiplied by a factor of 2 and 4 in the internal PLL circuit (including
phase detector, loop filtering, VCO and frequency divider) to obtain the output clock
signals. The rectangular output clocks have a 50 % duty factor.
Fig 20. CVBS (raw data) range for scaler input, data slicer and X port output
6.75 MHz = 429
6.75 MHz = 432
a. Sources containing 7.5 IRE black level
CVBS levels with default settings RAWG[7:0] = 64 and RAWO[7:0] = 128.
Equation for modification of the raw data levels via bytes RAWG and RAWO:
It should be noted that the resulting levels are limited to 1 to 254 in accordance with “ITU
Recommendation 601/656” .
offset (e.g. NTSC M).
255
209
CVBS
71
60
1
OUT
LUMINANCE
SYNC
=
Int
Rev. 03 — 16 February 2006
f
f
H
H
RAWG
-----------------
(50 Hz), or
(60 Hz)
Figure
black
black shoulder
sync bottom
64
white
001aac244
Multistandard video decoder with adaptive comb filter
21.
CVBS
nom
128
+
b. Sources not containing black level
255
199
RAWO
60
1
offset.
LUMINANCE
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
SYNC
white
black shoulder = black
sync bottom
SAF7118
001aac245
33 of 170

Related parts for saf7118