ks8701 Samsung Semiconductor, Inc., ks8701 Datasheet - Page 50

• Manufacturer Part Number: ks8701
• Description: Flextm Roaming Decoder Ii
• Manufacturer: Samsung Semiconductor, Inc.

KS8701
NDR: Noise Detect Result. These bits indicate the result of a noise detect. The results of noise detects
SCU: System Collapse Update. Set when the KS8701 is configured for manual collapse mode by setting the
RSC: Received System Collapse. When SCU is set, this value represents the system collapse value that
initiated by setting the SND bit in the roaming control packet will always be reported. The results of the
automatic noise detects performed in asynchronous mode will only be reported if the RND bit is set in
the roaming control packet. When continuous noise detects during block data are enabled by setting
the CND bit in the roaming control packet, only the “No FLEX signal detected” result will be reported.
These bits are cleared when read.
MCM bit in the roaming control packet and the system collapse of a frame is received. This bit is set no
more than once per frame regardless of the number of phases in the frame. This bit will not be set in
frames in which no block information word ones is received properly. This bit is cleared when read.
was received in the frame
NDR
00
01
10
11
FLEX
TM
Roaming Decoder II
Noise Detect was abandoned
FLEX signal not detected
FLEX signal detected
Noise Detect Result
No Information
Decoder-to-Host Packet Descriptions
49