cmc-sr2159er36 Pepperl+Fuchs, cmc-sr2159er36 Datasheet - Page 7

• Manufacturer Part Number: cmc-sr2159er36
• Description: Easy Tool Retracting System Cmc-sr2159er36
• Manufacturer: Pepperl+Fuchs

Packing Gland Instructions
1. If PACKING GLAND is not already installed, slide the PACKING GLAND
2. Loosen the LOCKING NUT. Slide LOCKING NUT and FERRULE away
3. Loosen the JAM NUT. Turn RETAINER clockwise to tighten packing. The
4. Tighten the JAM NUT, thereby locking the RETAINER in place.
5. Mount the PACKING GLAND on the NIPPLE or FLANGE and secure in
over the INSERTION ROD or PROBE.
The packing must be adjusted prior to mounting packing gland to
process.
from the RETAINER.
packing should be tightened until there is a resistance felt while sliding the
INSERTION ROD in and out. The following table summarizes the
recommended torque for ambient temperature against water:
Do not over tighten packing. This will result in damage to the gland.
place. The rod should be fully retracted at this time with the LOCKING
NUT and FERRULE clear of the RETAINER.
Pressure Rating
PTE (Teflon
Grafoil Packing
®
) Packing
240 in•lb
180 in•lb
150 psi
20 ft•lb
15 ft•lb
240 in•lb
180 in•lb
500 psi
20 ft•lb
15 ft•lb
1,000 psi 1,500 psi
300 in•lb
180 in•lb
25 ft•lb
15 ft•lb
300 in•lb
180 in•lb
25 ft•lb
15 ft•lb