cmc-sr2159er36 Pepperl+Fuchs, cmc-sr2159er36 Datasheet - Page 2

• Manufacturer Part Number: cmc-sr2159er36
• Description: Easy Tool Retracting System Cmc-sr2159er36
• Manufacturer: Pepperl+Fuchs

Mounting the Easy Tool
Refer to Figure 1.
1. Using the HANDLES move the SPINNER NUT assembly to the TOP most
2. Loosen the WING NUT and open the SWING ARM near the bottom of the
3. Slide the Easy Tool onto the PROBE so that the PACKING BODY of the
4. Close the SWING ARM and tighten the WING NUT to secure the arm in
5. Move the INSERT SLIDE to the RETRACTED POSITION by pulling back
6. Turning the HANDLES on the SPINNER NUT, align the TOP LEG of the
7. Push in the INSERT SLIDE to the ENGAGED POSITION, so that the TOP
position.
Easy Tool.
PROBE is held between the Easy Tool's MIDDLE PLATE and LOWER
BASE.
place.
on the KNOB. (See Figure 2.)
INSERT SLIDE to just above the SHOULDER OF THE CONNECTOR on
the PROBE.
LEG rests on the SHOULDER OF THE CONNECTOR. (See Figure 3.)