T315XW02-VS AUO, T315XW02-VS Datasheet - Page 8

• Manufacturer Part Number: T315XW02-VS
• Description: TFT-LCD PANEL
• Manufacturer: AUO

©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed
4.
5.
6.
7.
www.braemac.co.uk
[e-mail]
VCIM = 1.2V
The performance of the Lamp in LCD panel, for example life time or brightness, is extremely
influenced by the characteristics of the DC-AC Inverter. So all the parameters of an inverter should
be carefully designed as not to produce too much leakage current from high-voltage output of the
inverter. When you design or order the inverter, please make sure unwanted lighting caused by the
mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. After confirmation, the
LCD panel should be operated in the same condition as installed in your instrument.
Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,
TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage
current occurs between lamp wire and conducting tape.
The relative humidity must not exceed 80% non-condensing at temperatures of 40
temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operate at
low temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced.
VCIM
0V
T315XW02 VS - Specs. ver 0
Tel: [phone]
Fax: [phone]
VTH
VIL
8/30
or less. At
www.DataSheet4U.com