T315XW02-VD AUO, T315XW02-VD Datasheet - Page 8

• Manufacturer Part Number: T315XW02-VD
• Description: LCD Module
• Manufacturer: AUO

©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed
4.
5.
6.
7.
8.
9.
VCIM = 1.2V
The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter. When
you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the
lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD Assembly
should be operated in the same condition as installed in your instrument.
Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,
TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current
occurs between lamp wire and conducting tape.
The relative humidity must not exceed 80% non-condensing at temperatures of 40
temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operate at low
temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced.
The measured data is without boost function
W/O boost function Lifetime is defined and judged for lamp when analog and PWM dimming are
maximum values. With boost function Lifetime is defined and judged for lamp when boost function is
high (3.3V).
GND
VCIM
VTH
VTL
0V
T315XW02 VD - Specs. ver 0.2
10%
℃
Trush = 470 uS
90%
www.DataSheet.co.kr
VCC
℃
℃
8/28
or less. At
Datasheet pdf - http://www.DataSheet4U.net/