S1D13704 Epson Electronics America, Inc., S1D13704 Datasheet - Page 309

• Manufacturer Part Number: S1D13704
• Description: LCD Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
S5U13704B00C Rev. 2.0 Evaluation Board User Manual
Issue Date: 2002/09/16
JP4 - LCD Panel Voltage Selection
JP4 selects voltage level to the LCD panel.
When the jumper is in position 1-2, the voltage level is set to 3.3V.
When the jumper is in position 2-3, the voltage level is set to 5.0V.
JP5 - PCI Bridge FPGA
JP5 is used to enable or disable the PCI bridge FPGA.
When the jumper is in position 1-2, the PCI bridge FPGA is disabled. This position must
be used for non-PCI host.
When the jumper is off, the PCI bridge FPGA is enabled. The jumper must not be present
for PCI host.
Figure 3-5: Configuration Jumper (JP4) Location
Figure 3-6: Configuration Jumper (JP5) Location
LCD VDD
Disabled
3.3 Volt
FPGA
JP4
JP5
LCD VDD
5.0 Volt
Enabled
FPGA
X26A-G-014-02
S1D13704
Page 13