MDO4054-3GSA Tektronix, MDO4054-3GSA Datasheet - Page 5

• Manufacturer Part Number: MDO4054-3GSA
• Description: Specifications: Scope Type: Bench ; Scope Channels: 4 Analogue + 16 Digital + 1 RF ; Bandwidth: 500MHz ; Meter Display Type: XGA TFT-LCD Color ; Sampling Rate: 2.5GSPS ; Input Impedance: 1Mohm ; Rise Time: 700ps ; Input Voltage: 300Vrms ; Supply Volt
• Manufacturer: Tektronix

MDO4000 Frequency Domain display.
Key spectral parameters are adjusted quickly with the dedicated front-panel menus and
keypad.
Fast and Accurate Spectral Analysis
When using the RF input by itself, the MDO4000 Series display becomes a
full-screen Frequency Domain view.
Automated peak markers identify critical information at a glance. As shown here, the five
highest amplitude peaks that meet the threshold and excursion criteria are automatically
marked.
Key spectral parameters such as Center Frequency, Span, Reference
Level, and Resolution Bandwidth are all adjusted quickly and easily using
the dedicated front-panel menus and keypad.
Intelligent, Efficient Markers
In a traditional spectrum analyzer, it can be a very tedious task to turn
on and place enough markers to identify all your peaks of interest. The
MDO4000 Series makes this process far more efficient by automatically
placing markers on peaks that indicate both the frequency and the
amplitude of each peak. The criteria used to determine what a peak is can
be adjusted by the user.
The highest amplitude peak is referred to as the reference marker and
is shown in red. Marker readouts can be switched between Absolute and
Delta readouts. When Delta is selected, marker readouts show each peak’s
delta frequency and delta amplitude from the reference marker.
Two manual markers are also available for measuring non-peak portions of
the spectrum. When enabled, the reference marker is attached to one of
the manual markers, enabling delta measurements from anywhere in the
spectrum. In addition to frequency and amplitude, manual marker readouts
also include noise density and phase noise readouts depending on whether
Absolute or Delta readouts are selected. A “Reference Marker to Center”
function instantly moves the frequency indicated by the reference marker
to center frequency.
Mixed Domain Oscilloscopes — MDO4000 Series
www.tektronix.com
5