130-0026-4-71 Hirose Electric, 130-0026-4-71 Datasheet - Page 11
130-0026-4-71
Manufacturer Part Number
130-0026-4-71
Description
Miniature Waterproof Plastic Connectors
Manufacturer
Hirose Electric
Datasheet
1.130-0026-4-71.pdf
(12 pages)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
3
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
5. Remove the assembly from the fixture.
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
When tightening the collar make sure that the cable will NOT turn.
Connector
10 and 12 Pos.
3 and 6 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
11