ASMT-QYBB-NFG0E Avago Technologies, ASMT-QYBB-NFG0E Datasheet - Page 8

• Manufacturer Part Number: ASMT-QYBB-NFG0E
• Description: Super 0.5w Warm White Power Plcc-4 Surface Mount Led Indicator
• Manufacturer: Avago Technologies

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is a
soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly
or handling, the unit should be held on the body only.
Please refer to Avago Application Note AN 5288 for detail
information.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
B. Control after opening the MBB
C. Control for unfinished reel
D. Control of assembled boards
E. Baking is required if:
Recommended baking condition: 60±5°C for 20 hours.
8
- Unopen moisture barrier bag (MBB) can be stored
- It is not recommended to open the MBB prior to
- The humidity indicator card (HIC) shall be read
- The LEDs must be kept at <30°C / 60%RH at all time
- For any unuse LEDs, they need to be stored in
- If the PCB soldered with the LEDs is to be subjected
- “60%” HIC indicator is NOT blue.
- The LEDs are exposed to condition of >30°C / 60%
- The LEDs floor life exceeded 1 year.
at <40°C/90%RH for 12 months. If the actual shelf
life has exceeded 12 months and the HIC indicates
that baking is not required, then it is safe to reflow
the LEDs per the original MSL rating.
assembly (e.g. for IQC).
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 1 year.
sealed MBB with desiccant or desiccator at <5%RH.
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their floor life of 1 year.
RH at any time.
Device Color (X
Flux Bin Select (X
Individual reel will contain parts from one bin only
Flux Bin Limits
Tolerance of each bin limit = ± 12%
Color Bin Select (X
Individual reel will contain parts from one sub bin only.
Y
X
X
Bin ID
B
C
D
E
F
G
H
J
K
L
J
K
X
0
A
B
C
D
E
F
G
Z
4
2
3
1
)
2
X
4
)
3
)
Min. (lm)
5.50
7.00
9.00
11.50
15.00
19.50
25.50
33.00
43.00
56.00
43.00
56.00
Full Distribution
H, J and K only
H, J, K, L and M only
L and M only
L, M, N and P only
N and P only
N, P, Q and R only
Q and R only
Special Color Bin
Min Flux Bin
Max Flux Bin
Warm White
Max. (lm)
7.00
9.00
11.50
15.00
19.50
25.50
33.00
43.00
56.00
73.00
56.00
73.00