HPDL1414 Avago Technologies, HPDL1414 Datasheet

no-image

HPDL1414

Manufacturer Part Number
HPDL1414
Description
Manufacturer
Avago Technologies
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HPDL1414
Manufacturer:
LINEAR
Quantity:
11 820
Part Number:
HPDL1414
Manufacturer:
AVAGO
Quantity:
518
HDLx-2416 Series
Four Character 5.0 mm (0.2 inch) Smart 5x7
Alphanumeric Displays
Data Sheet
Description
These are 5.0 mm (0.2 inch) four character 5 x 7 dot matrix
displays driven by an on-board CMOS IC. These displays are
pin for pin compatible with the HPDL-2416. The IC stores
and decodes 7 bit ASCII data and displays it using a 5 x 7
font. Multiplexing circuitry, and drivers are also part of the
IC. The IC has fast setup and hold times which makes it easy
to interface to a microprocessor.
Absolute Maximum Ratings
Supply Voltage, V
Input Voltage, Any Pin to Ground
Free Air Operating Temperature Range, T
Storage Temperature, T
CMOS IC Junction Temperature, T
Relative Humidity (non-condensing) at 65°C
Soldering Temperature [1.59 mm (0.063 in.) Below Body]
ESD Protection, R = 1.5 kΩ, C = 100 pF
Note:
1. Maximum Voltage is with no LEDs illuminated.
Devices:
AlGaAs Red
HDLS-2416
HDLU-2416
Wave Soldering
Solder Dipping
ESD WARNING: Standard CMOS handling precautions should be observed with the HDLX-2416.
DD
to Ground
S
High Efficiency Red
HDLO-2416
HDLO-2416-DE000
[1]
J
(IC)
A
Orange
HDLA-2416
Features
• Enhanced drop-in replacement to HPDL-2416
• Smart alphanumeric display
• CMOS IC for low power consumption
• Software controlled dimming levels and blank
• 128 ASCII character set
• End-stackable
• Categorized for luminous intensity; Yellow and Green
• Low power and sunlight viewable AlGaAs versions
• Wide operating temperature range
• Excellent ESD protection
• Wide viewing angle (50° typ.)
-0.5 V to 7.0 V
-0.5 V to V
-40°C to +85°C
-40°C to 100°C
+150°C
85%
260°C for 5 secs
250°C for 3 secs
V
Z
Built-in RAM, ASCII decoder, and LED drive circuitry
categorized for color
-40°C to +85°C
= 2 kV (each pin)
DD
+ 0.5 V
Yellow
HDLY-2416
Green
HDLG-2416
HDLG-2416-FG000

Related parts for HPDL1414

HPDL1414 Summary of contents

Page 1

HDLx-2416 Series Four Character 5.0 mm (0.2 inch) Smart 5x7 Alphanumeric Displays Data Sheet Description These are 5.0 mm (0.2 inch) four character dot matrix displays driven by an on-board CMOS IC. These displays are pin for ...

Page 2

The address and data inputs can be directly connected to the microprocessor address and data buses. The HDLX-2416 has several enhancements over the HPDL- 2416. These features include an expanded character set, internal 8 level dimming control, external dimming capa- ...

Page 3

Character Set ASCII CODE HEX ...

Page 4

Recommended Operating Conditions Parameter Symbol Supply Voltage V DD Electrical Characteristics over Operating Temperature Range 4.5 < V < 5.5 V (unless otherwise specified) DD All Devices Parameter Symbol I Blank I (blnk Input Current I I Input ...

Page 5

Optical Characteristics at 25° 5 Full Brightness DD HDLS/HDLU-2416 Part Number Parameter HDLS-2416 Average Luminous Intensity per Digit, Character Average HDLU-2416 All Peak Wavelength Dominant Wavelength HDLO-2416 Parameter Average Luminous Intensity per Digit, Character Average ...

Page 6

AC Timing Characteristics over Operating Temperature Range at V Parameter Symbol Address Setup t AS Address Hold t AH Data Setup t DS Data Hold t DH Chip Enable Setup t CES Chip Enable Hold t CEH Write Time t ...

Page 7

Electrical Description Pin Function Chip Enable (CE and CE and pins 1 and 2) 2 Clear (CLR, pin 3) When CLR is a logic 0 the ASCII RAM is reset to 20hex (space) and the ...

Page 8

CHARACTER RAM 2 WRITE A – ADDRESS 7 D – D DATA WRITE READ ADDRESS CLR CLR ATTRIBUTE RAM D DIGIT CURSOR 0 DIGIT ...

Page 9

Display Clear Data stored in the Character RAM, Control Register, and Attribute RAM will be cleared if the clear (CLR) is held low for a minimum of 10 µs. Note that the display will be cleared regardless of the state ...

Page 10

Figure 3 shows how the Extended Function Disable (bit D of the Control Register), Master Blank (bit D 6 the Control Register), Digit Blank Disable (bit D Attribute RAM), and BL input can be used to blank the display. When ...

Page 11

(PIN 18) 10 kHz 1 k OUTPUT 1N914 555 6 250 LOG 400 pF Figure 4. Intensity modulation control using an astable multivibrator (reprinted with permission from ...

Page 12

... For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. Obsoletes 5989-3190EN ...

Related keywords