62514-1 TE Connectivity, 62514-1 Datasheet - Page 4
![](/photos/42/23/422366/pr62514-1_sml.jpg)
62514-1
Manufacturer Part Number
62514-1
Description
Manufacturer
TE Connectivity
Series
187r
Specifications of 62514-1
Product Type
Terminal
Terminal Line
Standard MAG-MATE
Terminal Configuration
Tab
Tab Hole/dimple
Dimple
Termination Method To Wire/cable
IDC Standard
Ru (ul Component Program)
Approved
Proprietary Name
FASTON
Tab Size (mm [in])
4.75 x 0.51 [.187 x .020]
Cavity Size
Size 2
Magnet Wire Range (mm [awg])
0.36 – 0.57 [23 – 27]
Terminal Height (mm [in])
7.62 [0.300]
Stock Thickness (mm [in])
0.51 [0.020]
Stock Thickness, Magnet Wire Side (mm [in])
0.41 [0.016]
Plating Material
Tin
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Strip
4.
4.1.
4.2.
4.3.
4.4.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product m eets the requirem ents of Figure 1. Failures
attributed to equipm ent, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specim ens resubm itted for qualification. Testing to
confirm corrective action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan shall specify the sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with the applicable product drawing
and this specification.
Sam ple Selection
Term inal housings and contacts shall be prepared in accordance with applicable Instruction
Sheets and shall be selected at random from current production. All test groups shall each consist
of 10 interconnect term ination assem blies per m agnet wire size. All term inals shall be term inated
in accordance with Application Specification 114-2046.
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 2.
108-2012
4 of 6