CS8420-DSZ Cirrus Logic Inc, CS8420-DSZ Datasheet - Page 83

• Manufacturer Part Number: CS8420-DSZ
• Description: IC CONV S/R DGTL AUDIO 28-SOIC
• Manufacturer: Cirrus Logic Inc
• Type: Sample Rate Converterr

Specifications of CS8420-DSZ

• Applications: Digital Audio
• Mounting Type: Surface Mount
• Package / Case: 28-SOIC
• Audio Control Type: Sample Rate Converter
• Control Interface: 3 Wire, Serial
• Supply Voltage Range: 4.75V To 5.25V
• Operating Temperature Range: -40°C To +85°C
• Audio Ic Case Style: SOIC
• No. Of Pins: 28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 598-1729

DS245F4
.
15.1.2 Reserving the First 5 Bytes in the E Buffer
15.1.3 Serial Copy Management System (SCMS)
15.1.4 Channel Status Data E Buffer Access
D-to-E buffer transfers periodically overwrite the data stored in the E buffer. This can be a problem for
users who want to transmit certain channel status settings which are different from the incoming settings.
In this case, the user would have to superimpose his settings on the E buffer after every D-to-E overwrite.
To avoid this problem, the CS8420 has the capability of reserving the first 5 bytes of the E buffer for user
writes only. When this capability is in use, internal D-to-E buffer transfers will NOT affect the first 5 bytes
of the E buffer. Therefore, the user can set values in these first 5 E bytes once, and the settings will persist
until the next user change. This mode is enabled via the Channel Status Data Buffer Control register.
In Software mode, the CS8420 allows read/modify/write access to all the channel status bits. For Con-
sumer mode SCMS compliance, the host microcontroller needs to read and manipulate the Category
Code, Copy bit and L bit appropriately.
In Hardware mode, the SCMS protocol can be followed by either using the COPY and ORIG input pins,
or by using the C bit serial input pin. These options are documented in the Hardware mode section of this
data sheet (See
The E buffer is organized as 24 x 16-bit words. For each word the MS Byte is the A channel data, and the
LS Byte is the B channel data (see
There are two methods of accessing this memory, known as one-byte mode and two-byte mode. The de-
sired mode is selected via a control register bit.
“Hardware Modes” on page
Figure 40. Flowchart for Writing the E Buffer
E to F interrupt occurs
Return
Figure
Optionally set E to F inhibit
If set, clear E to F inhibit
Wait for E to F transfer
Clear D to E inhibit
37).
Set D to E inhibit
55)
Write E data
CS8420
83