ADAU1701JSTZ Analog Devices Inc, ADAU1701JSTZ Datasheet - Page 14

• Manufacturer Part Number: ADAU1701JSTZ
• Description: IC AUDIO PROC 2ADC/4DAC 48-LQFP
• Manufacturer: Analog Devices Inc
• Series: SigmaDSP®r
• Type: Audio Processorr

Specifications of ADAU1701JSTZ

• Design Resources: Analog Audio Input, Class-D Output with ADAU1701, SSM2306, and ADP3336 (CN0162)
• Applications: Automotive, Monitors, MP3
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Audio Control Type: Digital
• Control Interface: I2C, Serial
• Supply Voltage Range: 1.8V, 3.3V
• Operating Temperature Range: 0°C To +70°C
• Audio Ic Case Style: LQFP
• No. Of Pins: 48
• Svhc: No SVHC
• Control / Process Application: MP3 Player Speaker Docks, Automotive Head Units, Studio Monitors
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-ADAU1701MINIZ - BOARD EVAL SIGMADSP AUD ADAU1701EVAL-ADAU1701EBZ - BOARD EVAL FOR ADAU1701
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADAU1701
OVERVIEW
The core of the ADAU1701 is a 28-bit DSP (56-bit with double-
precision processing) optimized for audio processing. The
program and parameter RAMs can be loaded with a custom
audio processing signal flow built by using SigmaStudio graphical
programming software from Analog Devices, Inc. The values
stored in the parameter RAM control individual signal processing
blocks, such as equalization filters, dynamics processors, audio
delays, and mixer levels. A safeload feature allows for transparent
parameter updates and prevents clicks in the output signals.
The program RAM, parameter RAM, and register contents can
be saved in an external EEPROM, from which the ADAU1701
can self-boot on start-up. In this standalone mode, parameters
can be controlled through the on-board multipurpose pins. The
ADAU1701 can accept controls from switches, potentiometers,
rotary encoders, and IR receivers. Parameters such as volume
and tone settings can be saved to the EEPROM on power-down
and recalled again on power-up.
The ADAU1701 can operate with digital or analog inputs and
outputs, or a mix of both. The stereo ADC and four DACs each
have an SNR of at least +100 dB and a THD + N of at least
−83 dB. The 8-channel, flexible serial data input/output ports
allow glueless interconnection to a variety of ADCs, DACs,
general-purpose DSPs, S/PDIF receivers and transmitters, and
sample rate converters. The serial ports of the ADAU1701 can
be configured in I
port compatible modes.
Twelve multipurpose (MP) pins allow the ADAU1701 to input
external control signals and output flags or controls to other
devices in the system. The MP pins can be configured as digital
I/Os, inputs to the 4-channel auxiliary ADC, or set up as the
serial data I/O ports. As inputs, they can be connected to buttons,
switches, rotary encoders, potentiometers, IR receivers, or other
external circuitry to control the internal signal processing program.
When configured as outputs, these pins can be used to drive
LEDs, control other ICs, or connect to other external circuitry
in an application.
The ADAU1701 has a sophisticated control port that supports
complete read/write capability of all memory locations. Control
registers are provided to offer complete control of the chip’s
configuration and serial modes. The ADAU1701 can be
configured for either SPI or I
an external EEPROM.
An on-board oscillator can be connected to an external crystal
to generate the master clock. In addition, a master clock phase-
locked loop (PLL) allows the ADAU1701 to be clocked from a
2
S, left-justified, right-justified, or TDM serial
2
C control, or can self-boot from
Rev. 0 | Page 14 of 52
variety of different clock speeds. The PLL can accept inputs of
64 × f
master clock of the core.
The SigmaStudio software is used to program and control the
SigmaDSP through the control port. Along with designing and
tuning a signal flow, the tools can be used to configure all of the
DSP registers and burn a new program into the external EEPROM.
SigmaStudio’s graphical interface allows anyone with digital or
analog audio processing knowledge to easily design a DSP
signal flow and port it to a target application. At the same time,
it provides enough flexibility and programmability for an
experienced DSP programmer to have in-depth control of the
design. In SigmaStudio, the user can connect graphical blocks
(such as biquad filters, dynamics processors, mixers, and
delays), compile the design, and load the program and
parameter files into the ADAU1701 memory through the
control port. Signal processing blocks available in the provided
libraries include
•
•
•
•
•
•
•
•
•
•
•
•
•
Additional processing blocks are always being developed.
Analog Devices also provides proprietary and third-party
algorithms for applications such as matrix decoding, bass
enhancement, and surround virtualizers. Contact Analog
Devices for information about licensing these algorithms.
The ADAU1701 operates from a 1.8 V digital power supply
and a 3.3 V analog supply. An on-board voltage regulator can
be used to operate the chip from a single 3.3 V supply. It is
fabricated on a single monolithic, integrated circuit and is
packaged in a 48-lead LQFP for operation over the 0°C to
+70°C temperature range.
Single- and double-precision biquad filters
Processors with peak or rms detection for monochannel
and multichannel dynamics
Mixers and splitters
Tone and noise generators
Fixed and variable gain
Loudness
Delay
Stereo enhancement
Dynamic bass boost
Noise and tone sources
FIR filters
Level detectors
GPIO control and conditioning
S
, 256 × f
S
, 384 × f
S
, or 512 × f
S
to generate the internal