53892-7 TE Connectivity, 53892-7 Datasheet - Page 3

• Manufacturer Part Number: 53892-7
• Description: Power to the Board CONTACT CRIMP 18-12 Series 1
• Manufacturer: TE Connectivity
• Series: Series Ir

Specifications of 53892-7

• Product Type: Contacts
• Termination Style: Crimp
• Contact Plating: Gold (30)
• Contact Material: Copper
• Wire Gauge Range: 18-12
• Wire Size (awg): 18-12
• Termination Method To Wire/cable: Crimp
• Ul File Number: E28476
• Csa File Number: LR7189
• Wire/cable Type: Discrete Wire
• Make First / Break Last: No
• Contact - Rated Current (a): 31
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Wire/cable Size (awg): 12 – 18
• Wire/cable Size (mm²): 0.811 – 3.09
• Wire/cable Size (cma): 1,601 – 6,098
• Profile Height (y-axis) (mm [in]): 3.05 [0.120]
• Length (x-axis) (mm [in]): 18.29 [0.720]
• Width (z-axis) (mm [in]): 3.76 [0.148]
• Underplate Material Thickness (µm [?in]): 1.27 [50.000]
• Contact Type: Pin/Socket
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Contact Base Material: Copper
• Contact Design: Spring Latch
• Underplate Material: Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Vde Tested: No
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Csa Certified: Yes
• Operating Temperature (°c [°f]): -40 – +75 [-40 – +167]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.864 – 0.914 [0.034 – 0.036]
• Accepts Wire Material: Copper
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: Details

Rev B
Physical shock.
Durability.
Contact retention.
Mating force.
Unm ating force.
Therm al shock.
Hum idity-tem perature cycling.
Tem perature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
10 pounds m axim um per contact
pair.
1.75 pounds m inim um per contact
pair.
See Note.
See Note.
See Note.
See Note.
W ire Size
( AW G)
18
16
14
12
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
Retention Force
(Lbs m axim um )
10
15
20
20
TE Spec 109-26-2.
Subject m ated sam ples to 75 G's
half-sine shock pulses of 6
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
TE Spec 109-27.
Mate and unm ate sam ples for 20
cycles at m axim um rate of 600
cycles per hour.
TE Spec 109-30.
Apply axial load to contacts by
gripping wire and hold for 10
seconds.
TE Spec 109-42, Condition A.
Measure force necessary to m ate
sam ples at m axim um rate of .5 inch
per m inute.
TE Spec 109-42, Condition A.
Measure force necessary to
unm ate sam ples at m axim um rate
of .5 inch per m inute.
TE Spec 109-22.
Subject m ated sam ples to 5 cycles
between -55 and 85°C.
TE Spec 109-23-3,
Condition B.
Subject m ated sam ples to 10
cycles between 25 and 65°C at
95% RH.
TE Spec 109-43.
Subject m ated sam ples to
tem perature life at 85°C for 1000
hours.
TE Spec 109-85-2.
Subject m ated sam ples to
environm ental class II for 14 days.
Procedure
108-11026
3 of 9