SC16C754BIBM,151 NXP Semiconductors, SC16C754BIBM,151 Datasheet - Page 28

• Manufacturer Part Number: SC16C754BIBM,151
• Description: IC UART QUAD W/FIFO 64-LQFP
• Manufacturer: NXP Semiconductors

Specifications of SC16C754BIBM,151

• Number Of Channels: 4, QUART
• Package / Case: 64-LQFP
• Fifo's: 64 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• Mounting Type: Surface Mount
• Data Rate: 5 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.25 V
• Supply Current: 6 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 2.5 V or 3.3 V or 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-3290; 935279069151; SC16C754BIBM-S

NXP Semiconductors
SC16C754B_4
Product data sheet
7.7 Modem Status Register (MSR)
This 8-bit register provides information about the current state of the control lines from the
modem, data set, or peripheral device to the processor. It also indicates when a control
input from the modem changes state.
per channel.
Table 15.
[1]
Bit
7
6
5
4
3
2
1
0
The primary inputs RI, CD, CTS, DSR are all active LOW, but their registered equivalents in the MSR and
MCR (in loopback) registers are active HIGH.
Symbol
MSR[7]
MSR[6]
MSR[5]
MSR[4]
MSR[3]
MSR[2]
MSR[1]
MSR[0]
Modem status register bits description
[1]
[1]
[1]
[1]
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
Description
CD (active HIGH, logic 1). This bit is the complement of the CD input during
normal mode. During internal loopback mode, it is equivalent to MCR[3].
RI (active HIGH, logic 1). This bit is the complement of the RI input during
normal mode. During internal loopback mode, it is equivalent to MCR[2].
DSR (active HIGH, logic 1). This bit is the complement of the DSR input
during normal mode. During internal loopback mode, it is equivalent MCR[0].
CTS (active HIGH, logic 1). This bit is the complement of the CTS input
during normal mode. During internal loopback mode, it is equivalent to
MCR[1].
state. Cleared on a read.
from LOW to HIGH. Cleared on a read.
state. Cleared on a read.
state. Cleared on a read.
CD. Indicates that CD input (or MCR[3] in loopback mode) has changed
RI. Indicates that RI input (or MCR[2] in loopback mode) has changed state
DSR. Indicates that DSR input (or MCR[0] in loopback mode) has changed
CTS. Indicates that CTS input (or MCR[1] in loopback mode) has changed
Rev. 04 — 6 October 2008
Table 15
shows modem status register bit settings
SC16C754B
© NXP B.V. 2008. All rights reserved.
28 of 51