SI3019-KT Silicon Laboratories Inc, SI3019-KT Datasheet - Page 69

• Manufacturer Part Number: SI3019-KT
• Description: IC VOICE DAA GCI/PCM/SPI 16TSSOP
• Manufacturer: Silicon Laboratories Inc
• Type: Chipsetr

Specifications of SI3019-KT

• Package / Case: 16-TSSOP
• Function: Data Access Arrangement (DAA)
• Interface: GCI, PCM, SPI
• Number Of Circuits: 1
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 8.5mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Includes: Line Voltage Monitor, Loop Current Monitor, Overload Detection, Parallel Handset Detection, Polarity Reversal Detection, TIP and
• Product: Modem Chip
• Supply Voltage (min): 3 V
• Supply Current: 8.5 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Power (watts): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Register 26. DC Termination Control
Reset settings = 0000_0000
Bit
7:6
5:4
3:2
Name
Type
1
0
Bit
Reserved Do not write to these register bits.
DCV[1:0]
MINI[1:0]
Name
DCR
ILIM
D7
DCV[1:0]
R/W
TIP/RING Voltage Adjust.
Adjust the voltage on the DCT pin of the line-side device, which affects the TIP/RING voltage
on the line. Low voltage countries should use a lower TIP/RING voltage. Raising the TIP/
RING voltage improves signal headroom.
Minimum Operational Loop Current.
Adjusts the minimum loop current so the DAA can operate. Increasing the minimum opera-
tional loop current improves signal headroom at a lower TIP/RING voltage.
Current Limiting Enable.
0 = Current limiting mode disabled.
1 = Current limiting mode enabled. Limits loop current to a maximum of 60 mA per the TBR21
standard.
DC Impedance Selection.
0 = 50 Ω dc termination is selected. Use this mode for all standard applications.
1 = 800 Ω dc termination is selected.
DCV[1:0]
MINI[1:0]
D6
00
01
10
11
00
01
10
11
D5
DCT Pin Voltage
Min Loop Current
MINI[1:0]
R/W
3.1 V
3.2 V
3.35 V
3.5 V
10 mA
12 mA
14 mA
16 mA
D4
D3
Rev. 1.03
D2
Function
ILIM
R/W
D1
DCR
R/W
D0
Si3018/19/10
69