ES-FA-11AA BANNER ENGINEERING, ES-FA-11AA Datasheet - Page 13

• Manufacturer Part Number: ES-FA-11AA
• Description: 98H7885
• Manufacturer: BANNER ENGINEERING

Specifications of ES-FA-11AA

• Coil Voltage Vac Nom: 24V
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 7A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 250V
• No. Of Poles: 2
• Relay Mounting: DIN Rail
• External Height: 80mm

ES-FA-9AA / ES-FA-11AA E-Stop Safety Modules
they will issue a return merchandise authorization (RMA) number for your paperwork, and give you the proper
shipping address.
Pack the Module carefully. Damage which occurs in return shipping is not covered by warranty.
P/N 060606 rev. E
Category
Supply Voltage and Current
Supply Protection Circuitry
Overvoltage Category
Pollution Degree
Output Configuration
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Specification
24V dc ±10% (SELV-rated supply according to EN IEC 60950, NEC Class 2)
24V ac ±10% , 50/60Hz (NEC Class 2-rated transformer)
Power consumption: approx. 2W/2VA
Protected against transient voltages and reverse polarity
Output relay contact voltage of 1V to 150V ac/dc: category III
Output relay contact voltage of 151V to 250V ac/dc: category III, if appropriate
overvoltage reduction is provided, as described on page 10.
2
ES-FA-9AA: 3 normally open (N.O.) output channels
ES-FA-11AA: 2 normally open (N.O.) output channels and 1 normally closed (N.C.)
auxiliary output
Each normally open output channel is a series connection of contacts from two
forced-guided (mechanically linked) relays, K1-K2. The normally closed Aux. output
channel of the ES-FA-11AA is a parallel connection of contacts from two forced-
guided relays, K1-K2.
Contacts: AgNi, 5 µm gold-plated
Low Current Rating: The 5 µm gold-plated contacts allow the switching of low
current/low voltage. In these low-power applications, multiple contacts can also be
switched in series (e.g., “dry switching”). To preserve the gold plating on the
contacts, do not exceed the following max. values at any time:
Min. voltage: 1V ac/dc
Min. current: 5 mA ac/dc
Min. power: 5 mW (5 mVA)
High Current Rating: If higher loads must be switched through one or more of
the contacts, the minimum and maximum values of the contact(s) changes to:
Min. voltage: 15V ac/dc
Min. current: 30 mA ac/dc
Min. power: 0.45 W (0.45 VA)
Specifications
Tel: [phone]
Max. voltage: 60V
Max. current: 300 mA
Max. power: 7 W (7 VA)
Max. voltage: 250V ac/dc
Max. current:
Max. power:
ES-FA-9AA: 6A
ES-FA-11AA: 7A
ES-FA-9AA: 200 W (1,500 VA)
ES-FA-11AA: 200 W (1,750 VA)
13