CX28229G-14 Mindspeed Technologies, CX28229G-14 Datasheet - Page 258

• Manufacturer Part Number: CX28229G-14
• Description: ATM IMA 800Mbps 1.8V/3.3V 256-Pin BGA
• Manufacturer: Mindspeed Technologies

Specifications of CX28229G-14

• Package: 256BGA
• Utopia Type: Level 2
• Typical Operating Supply Voltage: 1.8|3.3 V
• Minimum Operating Supply Voltage: 1.71|3 V
• Maximum Operating Supply Voltage: 1.89|3.6 V
• Maximum Output Rate: 800 Mbps

IMA Version 1.1 PICS Proforma
Table A-6. IMA Interface Operation (IIO) Functions (3 of 4)
A-12
IIO.30
IIO.31
IIO.32
IIO.33
IIO.34
IIO.35
IIO.36
IIO.37
IIO.38
IIO.39
IIO.40
IIO.41
IIO.42
IIO.43
IIO.44
Item
Does the implementation determine and report that the group is up
when both the local and remote GSMs are Operational?
Does the implementation determine and report that the group is
down when either the local or the remote GSM is not operational?
Does the implementation report the proper reasons why the GSM
is not operational?
Does the implementation report the highest priority reason
according to Table 14 on page 61?
Does the implementation report the entrance of the GTSM into the
Down state to the UM and ATM Layer Management?
Is the report of the entrance of the GTSM into the Down state the
only notification to the ATM Layer Management about Physical
Layer defects or failures?
Does the implementation report the return of the GTSM to the Up
state to the UM and ATM Layer Management?
Does the implementation ensure it does not drop any ATM layer
cells when adding or recovering links while the GSM is maintained
in the Operational state?
Does the implementation ensure that it does not drop any ATM
layer cells when deleting or inhibiting links while the GSM is
maintained in the Operational state?
When running the group start-up procedure, does the
implementation ensure that all accepted links have their states
changed to Tx=Usable in the same update of the ICP cell?
When running the group start-up procedure and after the Tx state
of all accepted links has been reported in a previous update of the
ICP cell, does the implementation ensure that all accepted links
have their states changed to Rx=Active in the same update of the
ICP cell?
When running the group start-up procedure and after the Rx state
of all accepted links has been reported in a previous update of the
ICP cell, does the implementation ensure that all accepted links
have their states changed to Tx=Active in the same update of the
ICP cell?
When running the group start-up procedure, does the
implementation wait a minimum of one second, unless all the
configured links are being reported Tx=Usable by FE, before
reporting links Rx=Active?
When running the group start-up procedure, does the
implementation wait a minimum of one second, unless all the
configured links are being reported Rx=Active by FE, before
reporting links Tx=Active?
Does the implementation synchronize the insertion of new links or
recovered links added using the slow recovery mechanism,
defined in Section 12.1.3.1 on page 74, within the IMA RR?
Protocol feature
Mindspeed Technologies
Cond. for
Status
™
Status
Pred.
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
(R-92)
(R-92)
(R-92)
(R-92)
(R-93)
(R-93)
(R-94)
(R-95)
(R-96)
(R-97)
(R-98)
(R-99)
(R-100)
(R-101)
(R-102)
Ref.
CX28224/5/9 Data Sheet
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
28229-DSH-001-D
Support