TE28F800F3B95 Intel, TE28F800F3B95 Datasheet - Page 8

• Manufacturer Part Number: TE28F800F3B95
• Manufacturer: Intel

Specifications of TE28F800F3B95

• Cell Type: NOR
• Density: 8Mb
• Access Time (max): 95ns
• Interface Type: Parallel
• Boot Type: Bottom
• Address Bus: 19b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Async/Sync
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 512K
• Supply Current: 60mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Not Compliant

28F800F3—Automotive
2.0
2.1
2.2
2
Block erase and program automation allows erase and program operations to be executed using an
industry-standard two-write command sequence. A block erase operation erases one block at a
time, and data is programmed in word (16 bit) increments. The erase suspend feature allows system
software to suspend an ongoing block erase operation in order to read from or program data to any
other block. The program suspend feature allows system software to suspend an ongoing program
operation in order to read from any other location.
The 3 Volt Fast Boot Block Flash memory devices offer two low-power savings features:
Automatic Power Savings (APS) and standby mode. The device automatically enters APS mode
following the completion of a read cycle. Standby mode is initiated when the system deselects the
device by driving CE# inactive or RST# active. RST# also resets the device to read array, provides
write protection, and clears the status register. Combined, these two features significantly reduce
power consumption.
Product Description
This section describes the pinout and block architecture of the device family.
Pinouts
Intel 3 Volt Fast Boot Block Flash memory provides upgrade paths in each package pinout up to
the 8-Mbit density. The family is available in Easy BGA and 56-lead SSOP packages. Ballout for
the Easy BGA is illustrated in
illustrated in
Pin Description
The pin description table describes pin usage.
Figure 2 on page
Figure 1 on page
4.
3. Pinout for the 8-Mbit, 56-Lead SSOP is
PRELIMINARY