CY7B9234-270JC Cypress Semiconductor Corp, CY7B9234-270JC Datasheet - Page 31

• Manufacturer Part Number: CY7B9234-270JC
• Manufacturer: Cypress Semiconductor Corp

Specifications of CY7B9234-270JC

• Lead Free Status / Rohs Status: Not Compliant

Ordering Information
Package Diagram
ESCON is a registered trademark of IBM. HOTLink is a trademark of Cypress Semiconductor Corporation. All product and company
names mentioned in this document are trademarks of their respective holders.
Document #: 38-02014 Rev. *A
© Cypress Semiconductor Corporation, 2004. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
270
400
270
400
Notes:
29. C0.7 = Transmit a deliberate code rule violation. The code chosen for this function follows the normal Running Disparity rules. Transmission of this Special
30. C1.7 = Transmit Negative K28.5 (−K28.5+) disregarding Current RD.
31. C2.7 = Transmit Positive K28.5 (+K28.5−) disregarding Current RD.
32. C4.7 = Transmit a deliberate code rule violation to indicate a Running Disparity violation.
33. Must be ordered with SMPTE-259M-CD Encoder (CY7C9235).
34. Must be ordered with SMPTE-259M-CD Encoder (CY7C9335).
Speed
Speed
Character has the same effect as asserting SVS = HIGH.
The receiver will only output this Special Character if the Transmission Character being decoded is not found in the tables.
The receiver will only output this Special Character if K28.5 is received with the wrong running disparity. The receiver will output C1.7 if −K28.5 is received
with RD+, otherwise K28.5 is decoded as C5.0 or C2.7.
The receiver will only output this Special Character if K28.5 is received with the wrong running disparity. The receiver will output C2.7 if +K28.5 is received
with RD−, otherwise K28.5 is decoded as C5.0 or C1.7
The receiver will only output this Special Character if the Transmission Character being decoded is found in the tables, but Running Disparity does not match.
This might indicate that an error occurred in a prior byte.
CY7B9234-270JC
CY7B9234-400JC
CY7B9334-270JC
CY7B9334-400JC
0.485
0.495
Ordering Code
Ordering Code
0.450
0.458
5
11
PIN #1 ID
[33]
[33]
[34]
[34]
12
4
Package Name
0.485
0.495
0.450
0.458
1
Package
28-Lead Plastic Leaded Chip Carrier J64
Name
J64
J64
J64
J64
26
18
28-Lead Plastic Leaded Chip Carrier
28-Lead Plastic Leaded Chip Carrier
28-Lead Plastic Leaded Chip Carrier
28-Lead Plastic Leaded Chip Carrier
25
19
0.045
0.055
SEATING PLANE
Package Type
Package Type
0.026
0.032
0.165
0.180
DIMENSIONS IN INCHES MIN.
0.090
0.120
0.013
0.021
0.020 MIN.
0.390
0.430
MAX.
51-85001-*A
Commercial
Commercial
Commercial
Commercial
CY7B9234
CY7B9334
Operating
Operating
Range
Range
Page 31 of 32
[+] Feedback