SPIS01 Xeltek, SPIS01 Datasheet - Page 3

• Manufacturer Part Number: SPIS01
• Description: SUPERPRO IS01 PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: ISP (In-System Reprogramming)r

Specifications of SPIS01

• Contents: Programmer, AC Adapter, Cable, CD, SD Card
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet
• Other names: 415-1053

Outline
What is IS01?
programming speed, good stability and high cost performance; it supports almost all serial
programmable devices and is very suitable for In-System or In-Application applications. It
can also support IC offline programming with certain IC sockets .
General functions
Hardware functions
Software functions
IS01 is a professional multifunction serial programmer with small volume, fast
• Very fast programming speed, which is selectable to adapt to cable length and
• Supports online (USB2.0 high-speed) and offline mode simultaneously.
• Supports most ISP protocol, e.g. I2C, SPI, UART, BDM, MW, JTAG, CAN,
• Have standard ATE interface to facilitate operation and control of external ATE
• Have
• Apply to many fields attributing to stable and reliable design, for example, R &
• Provides interfaces for I2C, SPI, UART, BDM, MW, JTAG, RS232, CAN etc.
• Provides VDD(0.5A) output line to supply light-load target system with power
• Long cable drive circuit has ESD protection, I/O level can be adjusted by
• Online software operates the programmer and manages offline project via USB
• In offline state, the operations are shown through LCD screen, 6-key pad and
• ATE interface provides the possibility of operating and controlling programmer
• 12VDC/2A system external power input.
• Support a wide range of devices, can support almost all the chips with ISP
load feature of user board.
RS232 etc.
device.
comprehensively.
D, mass production as well as in-system programming etc.
to directly (generally not recommended) and VPP (0.2A).
software in the range of 1.5V~4V.
(2.0 high-speed).
LED status, and the project file is stored using SD card (max. 4GB).
through external signals. Among them, there are 6 project selection lines
(SEL0~SEL5), 2 command input lines (START and STOP) as well as 3 status
output lines (PASS, FAIL and BUSY). External signals are isolated from the
system all through optocouplers.
function (Attention: not all algorithms for programming are free of charge).
overcurrent
protection
3
function
to
protect
your
equipment