C200H-ATTA3 Omron, C200H-ATTA3 Datasheet - Page 61

• Manufacturer Part Number: C200H-ATTA3
• Description: I/O LOCK BRACKT 10-SLOT
• Manufacturer: Omron

Specifications of C200H-ATTA3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: C200HATTA3

DC Power Supply
4-3
C200H-CPU03-E/CPU23-E/CPU33-E
C200H-PS211
DC Power Supply
!
Caution
Note
Tighten terminal block screws with a torque of 0.8 N-m.
Use crimp terminals suitable for M3.5 screws that have the following dimension.
Tighten power supply terminal screws with a torque of 0.8 N-m. Not tightening
the screws securely may result in a fire or faulty operation.
The C200HS-CPU03-E, C200HS-CPU23-E, and C200HS-CPU33-E CPUs,
and the C200H-PS211 I/O Power Supply Unit use a 24-VDC power supply with
an allowable fluctuation range of 20.4 to 26.4 VDC.
+
+
–
1. Be sure to use the same circuits when supplying power to the Power Supply
2. Check the settings for the power supply voltage switching terminals.
3. After the wiring has been completed, be sure to remove the top-surface la-
–
Screw (3.5 mm head with
self-raising pressure plate)
Screw (3.5 mm head with
self-raising pressure plate)
Units.
bel in order to allow heat radiation.
7 mm max.
Power line
•
pair cable (cross-section-
al area of 2 mm
Use AWG 14 twisted
Breaker
2
min).
•
•
fluctuations within
the specified range
(refer to Appendix
B Specifications)
Keep voltage
Supply 24 VDC
Section 4-3
47