MCIMX534AVV8C Freescale Semiconductor, MCIMX534AVV8C Datasheet - Page 85

• Manufacturer Part Number: MCIMX534AVV8C
• Description: IC, 32-BIT MPU, 800 MHz, 529-BGA
• Manufacturer: Freescale Semiconductor
• Series: ARM Cortex-A8r

Specifications of MCIMX534AVV8C

• Core Size: 32bit
• Program Memory Size: 288KB
• Cpu Speed: 800MHz
• Digital Ic Case Style: BGA
• No. Of Pins: 529
• Supply Voltage Range: 0.8V To 1.15V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

SENSB_HSYNC goes to low at the end of line. Pixel clocks then become invalid and the CSI stops
receiving data from the stream. For next line the SENSB_HSYNC timing repeats. For next frame the
SENSB_VSYNC timing repeats.
4.7.8.2.3
The timing is the same as the gated-clock mode (described in
except for the SENSB_HSYNC signal, which is not used (see
valid and cause data to be latched into the input FIFO. The SENSB_PIX_CLK signal is inactive (states
low) until valid data is going to be transmitted over the bus.
The timing described in
different timing. The CSI can be programmed to support rising/falling-edge triggered SENSB_VSYNC;
active-high/low SENSB_HSYNC; and rising/falling-edge triggered SENSB_PIX_CLK.
4.7.8.3
Figure 46
the IPU.
Freescale Semiconductor
SENSB_DATA,
SENSB_VSYNC,
SENSB_HSYNC
SENSB_PIX_CLK
(Sensor Output)
Table 58
SENSB_DATA[19:0]
depicts the sensor interface timing. SENSB_MCLK signal described here is not generated by
SENSB_PIX_CLK
SENSB_VSYNC
Electrical Characteristics
Non-Gated Clock Mode
lists the sensor interface timing characteristics.
Start of Frame
i.MX53xA Automotive and Infotainment Applications Processors, Rev. 3
Figure 45
invalid
Figure 45. Non-Gated Clock Mode Timing Diagram
nth frame
Figure 46. Sensor Interface Timing Diagram
is that of a typical sensor. Some other sensors may have a slightly
1st byte
IP3
IP2
n+1th frame
Section 4.7.8.2.2, “Gated Clock
invalid
Figure
1/IP1
45). All incoming pixel clocks are
1st byte
Electrical Characteristics
Mode,”)
85