MCIMX534AVV8C Freescale Semiconductor, MCIMX534AVV8C Datasheet - Page 52

• Manufacturer Part Number: MCIMX534AVV8C
• Description: IC, 32-BIT MPU, 800 MHz, 529-BGA
• Manufacturer: Freescale Semiconductor
• Series: ARM Cortex-A8r

Specifications of MCIMX534AVV8C

• Core Size: 32bit
• Program Memory Size: 288KB
• Cpu Speed: 800MHz
• Digital Ic Case Style: BGA
• No. Of Pins: 529
• Supply Voltage Range: 0.8V To 1.15V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Electrical Characteristics
4.6.6
The following subsections provide information on the EIM.
4.6.6.1
Table 36
the Reference Manual which are identical to those mentioned in this data sheet.
4.6.6.2
EIM supports16-bit and 8-bit devices operating in address/data separate or multiplexed modes. In some
of the modes the EIM and the NAND FLASH have shared data bus.
pads allocation in different modes.
52
4
5
NF17 is defined only in asymmetric operation mode.
NF17 max value is equivalent to max t
T
NF18 is defined only in Symmetric operation mode.
t
where t
EXTMC including I/O pad delay.
NF18 max value is equivalent to max t
T
aclk
DHR
aclk
EIM Chapter Nomenclature
is “emi_slow_clk” of the system.
is “emi_slow_clk” of the system.
(MIN) is calculated by the following formula:
Reference Manual
is a guide intended to help the user identify signals in the External Interface Module Chapter of
REpd
ADDR/M_DATA
External Interface Module (EIM)
EIM Signal Cross Reference
EIM Interface Pads Allocation
WAIT_B
is RE propogation delay in the chip including I/O pad delay, and t
BEy_B
WE_B
ADDR
OE_B
BCLK
DATA
ADV
CSx
i.MX53xA Automotive and Infotainment Applications Processors, Rev. 3
EIM_BCLK
EIM_CSx
EIM_RW
EIM_OE
EIM_EBx
EIM_LBA
EIM_A[25:16], EIM_DA[15:0]
EIM_DAx (Addr/Data muxed mode)
EIM_NFC_D (Data bus shared with NAND Flash)
EIM_Dx (dedicated data bus)
EIM_WAIT
Table 36. EIM Signal Cross Reference
RHZ
RHZ
value that can be used with NFC.
value that can be used with NFC.
Reference Manual External Signals and Pin Multiplexing Chapter,
and IOMUXC Controller Chapter Nomenclature
Tdl
2
– (t
REpd
Data Sheet Nomenclature,
+ t
Dpd
)
Dpd
Table 37
is Data propogation delay from I/O pad to
provides EIM interface
Freescale Semiconductor