C2234SW 3M, C2234SW Datasheet - Page 9

• Manufacturer Part Number: C2234SW
• Description: LCD Touch Panels 22 C2234SW 1680x1050 Cap Touch
• Manufacturer: 3M
• Series: -r
• Type: Capacitiver

Specifications of C2234SW

• Length: 18.6" (473.8mm)
• Width: 19.7" (500mm)
• Height: 11.6" (296.1mm)
• Interface: USB/Serial
• Diagonal Screen Size: 22" (559mm)
• Lead Free Status / Rohs Status: Details

3M™ MicroTouch™ Chassis Display User Guide
Service and Repair Indicators
Touch Sensor Care and Cleaning
•
Do not attempt to service this unit yourself. Removing the display cover may expose you
to dangerous voltages or other risks. Unplug the display from the power outlet and refer
servicing to qualified service personnel in the event that:
•
•
•
•
•
The touch sensor requires very little maintenance. 3M Touch Systems recommends that
you periodically clean the glass touch sensor surface. Be sure to turn off your display
before cleaning.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor. You can also use straight isopropyl alcohol.
•
•
• Follow all instructions and recommendations in the manufacturer's Material Safety
• Be sure to follow solvent manufacturer's precautions and directions for use when
• It is important to avoid using any caustic chemicals on the touch sensor. Do not
To avoid the potentially hazardous situations associated with the use of alcohol
or other solvents which may result in minor or moderate injury or property
damage:
To avoid ergonomic concerns:
Do not install the display in a manner or location with awkward accessibility.
Extended use may result in muscle, tendon, or fixed posture strains. It is
recommended you take periodic breaks from continuous use.
Liquid is spilled into the product or the product is exposed to rain or water.
The product does not operate properly when the operating instructions are followed.
The product has been dropped or the metal case has been damaged.
The product exhibits a distinct change in performance, indicating a need for service.
The power cable or plug is damaged or frayed.
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
Data Sheet and product label.
using any solvents
use any vinegar-based solutions.
CAUTION
3M Touch Systems, Inc. Proprietary Information -- 37762v01
9