C2234SW 3M, C2234SW Datasheet - Page 6

• Manufacturer Part Number: C2234SW
• Description: LCD Touch Panels 22 C2234SW 1680x1050 Cap Touch
• Manufacturer: 3M
• Series: -r
• Type: Capacitiver

Specifications of C2234SW

• Length: 18.6" (473.8mm)
• Width: 19.7" (500mm)
• Height: 11.6" (296.1mm)
• Interface: USB/Serial
• Diagonal Screen Size: 22" (559mm)
• Lead Free Status / Rohs Status: Details

6
Important Safety Information
Read and understand all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
could result in death or serious injury and/or property damage.
result in minor or moderate injury and/or property damage.
•
•
•
Intended Use
The 3M Touch Systems SCT Chassis Display was designed for touch input and tested
to replace an existing display. These displays are intended for indoor use only and are
not designed for use in hazardous locations.
Explanation of Signal Word Consequences
result in death or serious injury and/or property damage.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.
To avoid the risk of fire and/or explosion which will result in serious injury or
death:
To avoid the risk of fire which could result in serious injury or death:
To avoid the risk of electric shock which could result in serious injury or death:
•
•
•
•
WARNING: Indicates a potentially hazardous situation, which, if not avoided,
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may
DANGER: Indicates a potentially hazardous situation, which, if not avoided, will
DANGER
WARNING
Do not install or use this product in a hazardous location.
Do not remove the cover or back of the display -- dangerous voltages inside.
•
•
Do not use a power cord that is frayed or otherwise damaged
Do not remove the cover or back of the display. The backlight inverter output is at
high voltage.
This device must be operated with the original power supply and cable provided as
shown below:
Do not use a damaged power supply.
Plug power cord into appropriate grounded power source.
LITEON PA-1081-01 or EDAC EA11001C-120 for the C2254SW
LITEON PA-1041-0 or EDAC EA10521E-120 for the C2234SW
3M Touch Systems, Inc. Proprietary Information -- 37762v01
3M™ MicroTouch™ Chassis Display User Guide