SU2200RMXLTNET APC, SU2200RMXLTNET Datasheet - Page 12

• Manufacturer Part Number: SU2200RMXLTNET
• Description: UPS - Uninterruptible Power Supplies APC Smart-UPS XL 2200VA RM 5U 208V
• Manufacturer: APC

Specifications of SU2200RMXLTNET

• Power Rating: 1600 W
• Output Voltage Rating: 208 V
• Number Of Outlets: 5
• Interface Port: DB-9 RS-232, SmartSlot
• Runtime (full Load): 10 min
• Runtime (half Load): 34 min
• Topology: Online
• Tower / Rackmount: Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.1 Installing the Hardwire Kit on 100V or 120V
Follow the procedures in this section to install the hardwire kit to a
100V or 120V Smart-UPS in the tower configuration (Model numbers
SU2200, SU2200J, SU2200XL, and SU3000, SU3000J).
5.1.1 Removing the Rear Panels
Remove the Output Panel
1. Unpack and inspect the hardwire kit. Notify the carrier and dealer
2. Prepare the UPS for installation. Shut down any protected loads
3. IMPORTANT: Turn off the UPS and unplug it from the wall out-
4. Unscrew the output panel at the rear of the UPS. Remove only the
10
immediately if there is damage. Recycle the packaging or dispose
of it properly.
(computers, etc.), if present. Unplug all loads from the output re-
ceptacles of the UPS.
let.
4 screws indicated in Figure 5-1. Save these screws. They will be
used to install the replacement panels.
Tower Units