PIC16F737-I/SO Microchip Technology Inc., PIC16F737-I/SO Datasheet - Page 90

• Manufacturer Part Number: PIC16F737-I/SO
• Description: MCU, 8-Bit, 4KW Flash, 368 RAM, 25 I/O, SOIC-28
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F737-I/SO

• A/d Inputs: 11-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 5 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 25
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SOIC
• Programmable Memory: 7K Bytes
• Ram Size: 368 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC16F7X7
REGISTER 9-1:
DS30498C-page 88
bit 7-6
bit 5-4
bit 3-0
CCPxCON: CCPx CONTROL REGISTER (ADDRESS 17h, 1Dh, 97h)
bit 7
Unimplemented: Read as ‘0’
CCPxX:CCPxY: PWM Least Significant bits
Capture mode:
Unused.
Compare mode:
Unused.
PWM mode:
These bits are the two LSbs of the PWM duty cycle. The eight MSbs are found in CCPRxL.
CCPxM3:CCPxM0: CCPx Mode Select bits
0000 = Capture/Compare/PWM disabled (resets CCPx module)
0100 = Capture mode, every falling edge
0101 = Capture mode, every rising edge
0110 = Capture mode, every 4th rising edge
0111 = Capture mode, every 16th rising edge
1000 = Compare mode, set output on match (CCPxIF bit is set)
1001 = Compare mode, clear output on match (CCPxIF bit is set)
1010 = Compare mode, generate software interrupt on match (CCPxIF bit is set, CCPx pin is
1011 = Compare mode, trigger special event (CCPxIF bit is set, CCPx pin is unaffected);
11xx = PWM mode
Legend:
R = Readable bit
-n = Value at POR
U-0
—
unaffected)
CCP1 clears Timer1; CCP2 clears Timer1 and starts an A/D conversion (if A/D module
is enabled)
U-0
—
CCPxX
R/W-0
W = Writable bit
‘1’ = Bit is set
CCPxY
R/W-0
CCPxM3
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
CCPxM2
R/W-0
 2004 Microchip Technology Inc.
CCPxM1
x = Bit is unknown
R/W-0
CCPxM0
R/W-0
bit 0