AD5930YRUZ Analog Devices Inc, AD5930YRUZ Datasheet - Page 24

• Manufacturer Part Number: AD5930YRUZ
• Description: IC GEN PROG FREQ BURST 20TSSOP
• Manufacturer: Analog Devices Inc

Specifications of AD5930YRUZ

• Resolution (bits): 10 b
• Master Fclk: 50MHz
• Tuning Word Width (bits): 24 b
• Voltage - Supply: 2.3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Synthesizer Type: Frequency
• Frequency: 25MHz
• Supply Voltage Range: 2.3V To 5.5V
• Supply Current: 2.4mA
• Operating Temperature Range: -40°C To +105°C
• Digital Ic Case Style: TSSOP
• No. Of Pins: 20
• Pin Count: 20
• Screening Level: Automotive
• Package Type: TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

AD5930
EVALUATION BOARD
The AD5930 evaluation board allows designers to evaluate the high
performance AD5930 DDS modulator with minimum effort.
The evaluation board interfaces to the USB port of a PC. It is
possible to power the entire board off the USB port. All that is
needed to complete the evaluation of the chip is either a
spectrum analyzer or a scope.
The DDS evaluation kit includes a populated and tested
AD5930 printed circuit board. The EVAL-AD5930EB kit is
shipped with a CD-ROM that includes self-installing software.
The PC is connected to the evaluation board using the supplied
cable. The software is compatible with Microsoft® Windows®
2000 and Windows XP.
A schematic of the evaluation board is shown in Figure 40 and
Figure 41.
Rev. 0 | Page 24 of 28
Using the AD5930 Evaluation Board
The AD5930 evaluation kit is a test system designed to simplify
the evaluation of the AD5930. An application note is also
available with the evaluation board and gives full information
on operating the evaluation board.
Prototyping Area
An area is available on the evaluation board for the user to add
additional circuits to the evaluation test set. Users may want to
build custom analog filters for the output or add buffers and
operational amplifiers to be used in the final application.
XO vs. External Clock
The AD5930 can operate with master clocks up to 50 MHz. A
50 MHz oscillator is included on the evaluation board.
However, this oscillator can be removed and, if required, an
external CMOS clock can be connected to the part.