ENC28J60T/SO Microchip Technology, ENC28J60T/SO Datasheet - Page 27

• Manufacturer Part Number: ENC28J60T/SO
• Description: IC ETHERNET CTRLR W/SPI 28SOIC
• Manufacturer: Microchip Technology

Specifications of ENC28J60T/SO

• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: SPI
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 160mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 28-SOIC (7.5mm Width)
• For Use With: DM163024 - BOARD DEMO PICDEM.NET 2AC164123 - BOARD DAUGHTER ETH PICTAIL PLUSAC164121 - BOARD DAUGHTER PICTAIL ETHERNET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.0
4.1
The ENC28J60 is designed to interface directly with the
Serial Peripheral Interface (SPI) port available on many
microcontrollers. The implementation used on this
device supports SPI mode 0,0 only. In addition, the SPI
port requires that SCK be at Idle in a low state;
selectable clock polarity is not supported.
FIGURE 4-1:
FIGURE 4-2:
© 2008 Microchip Technology Inc.
SCK
SO
CS
SI
SCK
SERIAL PERIPHERAL
INTERFACE (SPI)
Overview
CS
SO
SI
MSb Out
SPI INPUT TIMING
SPI OUTPUT TIMING
MSb In
High-Impedance State
Don’t Care
Preliminary
Commands and data are sent to the device via the SI
pin, with data being clocked in on the rising edge of
SCK. Data is driven out by the ENC28J60 on the SO
line, on the falling edge of SCK. The CS pin must be
held low while any operation is performed and returned
high when finished.
LSb In
ENC28J60
LSb Out
DS39662C-page 25