KSZ8873MLL AM Micrel Inc, KSZ8873MLL AM Datasheet - Page 26

• Manufacturer Part Number: KSZ8873MLL AM
• Description: IC ETHERNET SWITCH 3PORT 64-LQFP
• Manufacturer: Micrel Inc

Specifications of KSZ8873MLL AM

• Controller Type: Ethernet Switch Controller
• Interface: MII
• Voltage - Supply: 1.8V, 2.5V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / RoHS Status: Not Compliant, Lead free / RoHS Compliant
• Other names: 576-3633; KSZ8873MLL AM; KSZ8873MLLAM

Micrel, Inc.
The KSZ8873MLL/FLL/RLL will not forward the following packets:
1. Error packets
2. IEEE802.3x PAUSE frames
3. "Local" packets
September 2009
These include framing errors, Frame Check Sequence (FCS) errors, alignment errors, and illegal size
packet errors.
KSZ8873MLL/FLL/RLL intercepts these packets and performs full duplex flow control accordingly.
Based on destination address (DA) lookup. If the destination port from the lookup table matches the port
from which the packet originated, the packet is defined as "local."
Figure 5. Destination Address Resolution Flow Chart, Stage 2
Spanning Tree
IGMP Process
Membership
Port Mirror
Port VLAN
Process
Process
Check
PTF1
PTF2
- Check receiving port's receive enable bit
- Check destination port's transmit enable bit
- Check whether packets are special (BPDU
- Applied to MAC #1 and MAC #2
- MAC #3 is reserved for
- IGMP will be forwarded to port 3
- RX Mirror
- TX Mirror
- RX or TX Mirror
- RX and TX Mirror
or specified)
microprocessor
26
KSZ8873MLL/FLL/RLL
M9999-092309-1.2