SC18IS600IPW,112 NXP Semiconductors, SC18IS600IPW,112 Datasheet - Page 8

• Manufacturer Part Number: SC18IS600IPW,112
• Description: IC INTERFACE SPI/I2C 16-TSSOP
• Manufacturer: NXP Semiconductors

Specifications of SC18IS600IPW,112

• Package / Case: 16-TSSOP
• Controller Type: I²C Bus Controller
• Interface: SPI
• Voltage - Supply: 2.4 V ~ 3.6 V
• Current - Supply: 11mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-3511 - DEMO BOARD SPI TO I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-3232-5; 935279912112; SC18IS600IPW

NXP Semiconductors
SC18IS600_601_5
Product data sheet
6.2.1.2 Open-drain output configuration
6.2.1.3 Input-only configuration
6.2.1.4 Push-pull output configuration
The open-drain output configuration turns off all pull-ups and only drives the pull-down
transistor of the pin when the pin latch contains a logic 0. To be used as a logic output, a
pin configured in this manner must have an external pull-up, typically a resistor tied to
V
The open-drain pin configuration is shown in
An open-drain pin has a Schmitt-triggered input that also has a glitch suppression circuit.
The input-only pin configuration is shown in
also has a glitch suppression circuit.
The push-pull output configuration has the same pull-down structure as both the
open-drain and the quasi-bidirectional output modes, but provides a continuous strong
pull-up when the pin latch contains a logic 1. The push-pull mode may be used when
more source current is needed from a pin output.
The push-pull pin configuration is shown in
A push-pull pin has a Schmitt-triggered input that also has a glitch suppression circuit.
Fig 7.
Fig 8.
DD
. The pull-down for this mode is the same as for the quasi-bidirectional mode.
Open-drain output configuration
Input-only configuration
pin latch data
Rev. 05 — 28 July 2008
input data
input data
V
SS
Figure
Figure
glitch rejection
Figure
9.
8. It is a Schmitt-triggered input that
7.
glitch rejection
002aab884
GPIO pin
SC18IS600/601
SPI to I
002aab883
GPIO pin
© NXP B.V. 2008. All rights reserved.
2
C-bus interface
8 of 30