LAN9116-MT SMSC, LAN9116-MT Datasheet - Page 17

• Manufacturer Part Number: LAN9116-MT
• Description: IC ETHERNET CTRLR 10/100 100TQFP
• Manufacturer: SMSC

Specifications of LAN9116-MT

• Controller Type: Ethernet Controller
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Other names: 638-1011

Highly Efficient Single-Chip 10/100 Non-PCI Ethernet Controller
Datasheet
SMSC LAN9116
PIN
NO.
NO.
PIN
95
69
6
5
NAME
EEPROM Clock,
GPO4 RX_DV,
Crystal 1
Crystal 2
RX_CLK
NAME
Reset
Table 2.4 Serial EEPROM Interface Signals (continued)
SYMBOL
RX_DV/RX_CLK
EECLK/GPO4/
nRESET
SYMBOL
Table 2.5 System and Power Signals
XTAL1
XTAL2
DATASHEET
BUFFER
TYPE
BUFFER
(PU)
TYPE
Oclk
lclk
17
IS
O8
NUM
PINS
NUM
PINS
1
1
1
1
DESCRIPTION
External 25MHz Crystal Input.
Can also be connected to single-
ended TTL oscillator. If this method is
implemented, XTAL2 should be left
unconnected.
External 25MHz Crystal output.
Active-low reset input. Resets all logic
and registers within the LAN9116
This signal is pulled high with a weak
internal pull-up resistor. If nRESET is
left unconnected, the LAN9116 will
rely on its internal power-on reset
circuitry
Note:
EEPROM Clock: Serial EEPROM
Clock pin.
General Purpose Output 4: This
pin can also function as a general-
purpose output, or it can be
configured to monitor the RX_DV or
RX_CLK signals on the internal MII
port. When configured as a GPO
signal, or as an RX_DV/RX_CLK
monitor, the EECS pin is deasserted
so as to never unintentionally access
the serial EEPROM. This signal
cannot function as a general-
purpose input.
Note:
The LAN9116 must always
be read at least once after
power-up, reset, or upon
return from a power-saving
state or write operations will
not function. See
3.11, "Detailed Reset
Description," on page 41
additional information
When the EEPROM
interface is not used, the
EECLK pin must be left
unconnected.
DESCRIPTION
Revision 1.5 (07-11-08)
Section
for