KSZ8893MBL Micrel Inc, KSZ8893MBL Datasheet - Page 21

• Manufacturer Part Number: KSZ8893MBL
• Description: IC MANAGED SW 10/100 100-LFBGA
• Manufacturer: Micrel Inc

Specifications of KSZ8893MBL

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3090

December 2007
Ball Number
A8
B7
A7
B6
A6
B5
A5
B4
A4
B3
A3
B2
A2
Ball Name
P2SPD
P2DPX
P2FFC
P2LED3
LEDSEL1
P1LED3
RMII_EN
HWPOVR
P2MDIXDIS
P2MDIX
P1ANEN
P1SPD
P1DPX
Type
Ipd
Ipd
Ipd
Opd
Ipd
Opd
Opd
Ipd
Ipd
Ipd
Ipu
Ipd
Ipd
(1)
21
Ball Function Description
1 = force port 2 to 100BT if P2ANEN = 0
0 = force port 2 to 10BT if P2ANEN = 0
1 = port 2 default to full duplex mode if P2ANEN = 1 and
auto-negotiation fails. Force port 2 in full duplex mode if
P2ANEN = 0.
0 = port 2 default to half duplex mode if P2ANEN = 1 and
auto-negotiation fails. Force port 2 in half duplex mode if
P2ANEN = 0.
1 = always enable (force) port 2 flow control feature
0 = port 2 flow control feature enable is determined by auto-
negotiation result.
Port 2 LED indicator
Note: Internal pull-down is weak; it will not turn ON the LED.
See description in pin 4.
LED display mode select
See description in pins 1 and 4.
Port 1 LED indicator
Note: An external 1K pull-down is needed on this pin if it is
connected to a LED. The 1K resistor will not turn ON the
LED.
See description in pin 1.
Strap pin for RMII Mode
0 = Disable
1 = Enable
After reset, this pin has no meaning and is a no connect.
Hardware pin overwrite
0 = Disable. All strap-in pins configurations are overwritten by
the EEPROM configuration data
1 = Enable. All strap-in pins configurations are overwritten by
the EEPROM configuration data, except for register 0x2C bits
[7:5], (port 2: auto-negotiation enable, force speed, force
duplex).
Port 2 Auto MDI/MDI-X
PD (default) = enable
PU = disable
Port 2 MDI/MDI-X setting when auto MDI/MDI-X is disabled.
PD (default) = MDI-X (transmit on TXP2 / TXM2 pins)
PU = MDI, (transmit on RXP2 / RXM2 pins)
1 = enable auto-negotiation on port 1
0 = disable auto-negotiation on port 1
1 = force port 1 to 100BT if P1ANEN = 0
0 = force port 1 to 10BT if P1ANEN = 0
1 = port 1 default to full duplex mode if P1ANEN = 1 and
auto- negotiation fails. Force port 1 in full-duplex mode if
P1ANEN = 0.
0 = port 1 default to half duplex mode if P1ANEN = 1 and
auto- negotiation fails. Force port 1 in half duplex mode if
P1ANEN = 0.
M9999-121007-1.5