142-0701-441 Emerson Network Power, 142-0701-441 Datasheet - Page 248

no-image

142-0701-441

Manufacturer Part Number
142-0701-441
Description
RF Connectors SMA FRONT MOUNT JACK
Manufacturer
Emerson Network Power
Datasheet

Specifications of 142-0701-441

Product
Connector
Rf Series
SMA
Gender
Receptacle
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
248
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
BNC Straight Crimp Type Plugs
for Flexible Cable
Connectivity Solutions
Tel: 800-247-8256
CPMC-88-21
PART NO.
RG-58, RG-59 PLENUM .235 (5.97), .250 (6.35)
Fax: 507-833-6287
CABLE
1. Identify connector parts. (3 piece parts)
2. Trim the cable to the dimensions shown. Take care not to
3. Slide the crimp sleeve onto the cable, narrow end first.
4. Slide the body over the contact and under the braid. Then
5. Arrange the braid uniformly around the crimp stem of the
nick the center conductor or the braid.
Solder the contact to the center conductor using the mini-
mum amount necessary for a good joint, make sure that
the contact is flush with the insulation of the cable. Flare
the braid.
seat the body firmly onto the contact.
body. Slide the crimp sleeve forward and crimp using the
recommended crimp hex.
www.EmersonNetworkPower.com/connectivity
SLEEVE HEX
CRIMP
STRAIN RELIEF
CRIMP HEX
.210 (5.33)
24-8857P/24-9859P
RECOMMENDED
CRIMP TOOL

Related parts for 142-0701-441