142-4308-401 Emerson Network Power, 142-4308-401 Datasheet - Page 254

• Manufacturer Part Number: 142-4308-401
• Description: RF Connectors BLHD JCK 142/400 GLD
• Manufacturer: Emerson Network Power

Specifications of 142-4308-401

• Product: Connector
• Rf Series: SMA
• Gender: Receptacle
• Polarity: Reverse
• Contact Plating: Gold
• Shell Plating: Gold
• Impedance: 50 Ohms
• Termination Style: Crimp, Solder
• Body Style: Straight
• Connector Type: Jack
• Maximum Frequency: 12.4 GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

254
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
N Straight Crimp Type Plugs for Flexible Cable
PART NO.
CPN-68-13
CPN-68-1
CPN-68-8
Connectivity Solutions
RG-8, 213
CABLE
RG-142
RG-58
.335 (8.50)
.335 (8.50)
.354 (9.00)
“A”
Tel: [phone]
STRIP DIMENSIONS
.079 (2.00)
.079 (2.00)
.138 (3.50)
“B”
.157 (4.00)
.157 (4.00)
.157 (4.00)
•
“C”
Fax: [phone]
SLEEVE HEX CRIMP HEX
.429 (10.90)
.215 (5.46)
.215 (5.46)
CRIMP
•
www.EmersonNetworkPower.com/connectivity
CONTACT
.065 (1.65)
.065 (1.65)
.100 (2.54)
1. Identify connector parts. (3 piece parts–except
2. Strip cable to dimensions shown. Do not nick
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over con-
bulkheads)
braid or center conductor. Tin center conductor
if contact will be solder attached. Do not tin cen-
ter conductor if contact is to be crimp attached.
A wire stripper of correct size is recommended
for this step. Slide heat shrink (as applicable) and
crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center
conductor through hole using a minimum amount
of solder for a good joint.
Crimp Attachment (where applicable): Crimp
contact to center conductor using recommended
crimp hex.
tact and under braid. Then seat body assembly
firmly onto contact. The cable may have to be
held in a clamping fixture. Arrange braid uniformly
around crimp stem. Slide crimp sleeve forward
and crimp using recommended crimp hex. Slide
heat shrink forward and shrink (as applicable).
RECOMMENDED
CRIMP TOOL
24-8858P
24-8858P
24-313