142-4308-401 Emerson Network Power, 142-4308-401 Datasheet - Page 248

• Manufacturer Part Number: 142-4308-401
• Description: RF Connectors BLHD JCK 142/400 GLD
• Manufacturer: Emerson Network Power

Specifications of 142-4308-401

• Product: Connector
• Rf Series: SMA
• Gender: Receptacle
• Polarity: Reverse
• Contact Plating: Gold
• Shell Plating: Gold
• Impedance: 50 Ohms
• Termination Style: Crimp, Solder
• Body Style: Straight
• Connector Type: Jack
• Maximum Frequency: 12.4 GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

248
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
BNC Straight Crimp Type Plugs
for Flexible Cable
Connectivity Solutions
Tel: [phone]
CPMC-88-21
PART NO.
•
RG-58, RG-59 PLENUM .235 (5.97), .250 (6.35)
Fax: [phone]
CABLE
1. Identify connector parts. (3 piece parts)
2. Trim the cable to the dimensions shown. Take care not to
3. Slide the crimp sleeve onto the cable, narrow end first.
4. Slide the body over the contact and under the braid. Then
5. Arrange the braid uniformly around the crimp stem of the
nick the center conductor or the braid.
Solder the contact to the center conductor using the mini-
mum amount necessary for a good joint, make sure that
the contact is flush with the insulation of the cable. Flare
the braid.
seat the body firmly onto the contact.
body. Slide the crimp sleeve forward and crimp using the
recommended crimp hex.
•
www.EmersonNetworkPower.com/connectivity
SLEEVE HEX
CRIMP
STRAIN RELIEF
CRIMP HEX
.210 (5.33)
24-8857P/24-9859P
RECOMMENDED
CRIMP TOOL