U0805R104KCT MULTICOMP, U0805R104KCT Datasheet - Page 6

• Manufacturer Part Number: U0805R104KCT
• Description: CAPACITOR CERAMIC, 0.1UF, 50V, X7R, 0805
• Manufacturer: MULTICOMP

Specifications of U0805R104KCT

• Dielectric Characteristic: X7R
• Capacitance: 0.1µF
• Capacitance Tolerance: ± 10%
• Voltage Rating: 50VDC
• Capacitor Case Style: 0805
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes

Humidity
(Steady
State)
and
Humidity
Load
Load Life
Nickel Barrier
Multilayer Ceramic Capacitors
Item
Capacitance
Capacitance
Appearance
Appearance
External
External
Change
Change
(∆ C/C)
(∆ C/C)
DF
DF
IR
IR
No mechanical damage
500MΩ minimum or 25Ω *F
(Which ever is smaller)
No mechanical damage
1000MΩ minimum or 50Ω *F
(Whichever is smaller)
X7R, X5R: Less than 2 times of initial
X7R, X5R: Less than 2 times of initial
Y5V and Z5U: Less than 1.5 times of
Y5V and Z5U : Less than 1.5 times of
PS: C: Nominal Capacitance (pF)
PS: C : Nominal capacitance (pF)
PS: C : Nominal capacitance (pF)
NPO: ±5% or ±0.5 pF maximum
NPO: ±3% or ±0.3 pF maximum
C<10pF: Q ≥ 200 + 10°C
NPO: C ≥30pF : Q ≥ 350
NPO: C ≥30pF: Q ≥ 350
C<30pF:Q ≥ 400 + 20°C
(Whichever is larger)
(Whichever is larger)
C<10pF: 200+10°C
X7R/X5R: ±12.5%
X7R/X5R: ±12.5%
30pF>:C ≥10pF:
Q ≥ 275 +205°C
10pF≤C<30pF:
Performance
Q≥100+2.5°C
Y5V: ±30%
Z5U: ±30%
Y5V: ±30%
Z5U: ±30%
initial value
initial value
value
value
Page 6
Humidity load: (Not apply for the product with rated voltage
≥250V):
90 to 95%RH for 1000+48/-0 hours.
Leave the capacitors in ambient condition for the following time
before measurement.
Class 1: 1~2 hours.
Class 2: 24 ±2 hours.
Charge / discharge current shall not exceed 50 mA.
Preconditioning: (only for class 2):
Apply the rated DC voltage for 1hour at 40 ±2°C. Remove and
let sit for 48 ±4 hours at room temperature.
Perform initial measurement.
Humidity (steady state):
The test procedure is same as that in Humidity load but only
without rated voltage applied.
Apply 2 x rated voltage at maximum operating temperature
±2°C for 1000 +48/-10 hours.
Leave the capacitors in ambient condition for the following time
before measurement.
Class I: 1~2 hours
Class II: 24 ±2 hours
Charge / discharge current shall. not exceed 50 mA.
Preconditioning: (only for class 2):
Apply 200% of the rated DC voltage for 1 hour at the maximum
operating temperature ±3°C. Remove and let sit for 24 ±2
hours at room temperature.
Perform initial measurement.
Apply the rated voltage at temperature 40 ±2°C and humidity
Test or Inspection Method
27/04/06 V1.0