148384-5 TE Connectivity, 148384-5 Datasheet - Page 10

• Manufacturer Part Number: 148384-5
• Description: SOCKET, DIN41612, STRAIGHT, M, 24+8WAY
• Manufacturer: TE Connectivity

Specifications of 148384-5

• Connector Type: Pitch Spacing
• No. Of Contacts: 32
• Gender: Receptacle
• No. Of Rows: 3
• Rows Loaded: A + B + C
• Contact Termination: Through Hole
• Contact Material: Phosphor Bronze
• Contact: RoHS Compliant
• Pitch Spacing: 2.54mm
• Contact Plating: Gold
• Rohs Compliant: Yes
• Product Series: Type M
• Mount Angle: Vertical
• Post Type: Compliant Post
• Din Level: II
• Loaded With Single Contacts Only: Yes
• Color: Gray
• Toolless (flat Rock): Yes
• Termination Post Length (mm [in]): 6.00 [0.236]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Signal Contacts: 24
• Contact Type: Socket
• Number Of Power Or Coaxial Contacts: 8
• Preloaded: Yes
• Contact Configuration: Coaxial, Power
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Application: Board-to-Board Power

3.7. Mating and Alignment
10 of 18
C. Shrouds
Mating capabilities may be expanded by stacking connectors with the use of a shroud. Shrouds are used
with all 48-- and 96--position, three--row, Type C connectors and all 48-- and 96--position, Type R
connectors with ACTION PIN contacts mounted in pc boards with a thickness of 3.18 mm [.125 in.],
2.36 mm [.093 in.], and 1.57 mm [.062 in.]. Shrouds must be selected according to size (contact positions)
and height (contact length) and are applied manually. Refer to Figure 8.
A. Connector Seating
Seated connectors must be bottomed on the pc board, measured from the top of the connector standoffs
to the pc board, to within the dimension shown in Figure 9.
Connector Seating
PC Board
0.25 [.010]
(Max)
Standoff
Shroud
PC Board
Figure 8
Figure 9
Dust Cover
(Ref)
Pin Connector
114- 9014
Rev G